OS / BAT manager: (00010001) attempt to free already-freed block (00010002) disk is full (00010003) attempt to free illegal disk address (00010004) BAT not mounted (00010005) disk needs salvaging (00010006) disk quota exceeded (00010007) disk quota table exceeded (00010008) disk quota table full OS / VTOC manager: (00020001) VTOC not mounted (00020002) VTOC is bad (00020003) no file map (00020004) no UID (00020005) not found (00020006) UID not found (00020007) duplicate UID (00020008) uid mismatch (00020009) only local access allowed OS / AST manager: (00030001) attempted reference to out-of-bounds address (00030003) no replaceable aste's (00030004) segment is not deactivatable (00030005) write concurrency violation (00030006) incompatible request (00030007) reference count says unused (00030008) segment not found in bst (00030009) segment thread error in bst (0003000A) only local access allowed (0003000B) system object cannot be deleted (0003000C) last page partially written OS / MST manager: (00040001) object not found (00040002) invalid length (00040003) no space available (00040004) reference to illegal address (00040005) reference to out-of-bounds address (00040006) no asid is available (00040007) object is not mapped (00040008) no rights (00040009) insufficient rights (0004000A) guard fault (0004000B) wrong type - can't map system objects (0004000C) ppn list overflow (0004000D) uid mismatch (0004000E) virtual memory resources exhausted (0004000F) invalid va for install of io page (00040010) invalid segment count (00040011) asid 0 is illegal for this mapping (00040012) specified UID is not for a VM area (00040013) asid must be 0 for this mapping (00040014) invalid request OS / PMAP manager: (00050001) not allocated (00050002) already allocated (00050003) mismatch (00050004) bad wire (00050005) bad unwire (00050006) bad assoc (00050007) pages wired (00050008) page null (00050009) bad disk address (0005000A) read concurrency violation (0005000B) changed pmods (0005000C) invalid pmape (0005000D) attempt to map i/o page over real page (0005000E) bst threads yielded invalid va (00050010) illegal pid argument from dxm callback (00050011) illegal wsl index (00050012) page sparse OS / MMAP manager: (00060004) bad avail (00060005) bad free (00060006) bad unavail (00060007) examined max (00060008) inconsistent mmape (00060009) illegal wsl index (0006000A) illegal pid (0006000B) ws lists exhsusted (0006000C) bad install (0006000D) bad reclaim (0006000E) contiguous pages unavailable OS / MMU manager: (00070001) mmu miss (00070002) va not in valid mmu manager range (00070003) va does not have os_pmap (00070004) ptt parity error (00070005) pft parity error (00070006) mmu timeout (00070007) unknown mmu status (00070008) mmu parity error (00070009) data cache parity error (0007000A) unexpected virtual timeout (0007000B) write buffer timeout (0007000C) bad PPN install request OS / disk manager: (00080001) disk not ready (00080002) disk controller busy (00080003) disk controller time-out (00080004) disk controller error (00080005) disk equipment check (00080006) floppy is not 2-sided (00080007) disk write protected (00080008) bad disk format (00080009) disk data check (0008000A) DMA overrun (0008000B) volume in use (0008000C) volume table full (0008000D) volume not properly mounted or assigned (0008000E) operation requires a physical volume (0008000F) invalid volume index (00080010) logical volume not found (00080011) disk block header error (00080012) invalid disk address (00080013) disk buffer is not page aligned (00080014) invalid logical volume index or list (00080015) disk seek error (00080016) drive timed out before operation completed (00080017) bus error occurred during disk DMA transfer (00080018) invalid unit number (00080019) unknown status returned by hardware (0008001A) invalid physical volume label (0008001B) floppy door has been opened or storage module has been stopped (0008001C) read after write failed (0008001D) dma not at end of range (0008001E) disk already mounted (0008001F) software detected checksum error (00080020) checksum error in read after write (00080021) too many wired pages -- storage module manager (00080022) disk driver logic error (00080023) unknown error status from drive (00080024) unrecognized drive id (00080025) memory parity error during disk write (00080026) unrecognized interrupt from disktape controller (00080027) ecc error in sector id field (00080028) disk subsystem detected a DC powerfail (00080029) transfer not executed (0008002A) illegal request for device (0008002B) unit attention presented by device (0008002C) manufacturing badspot information not available or no needed (0008002D) disk striping not yet supported on this device (0008002E) queued drivers not yet supported on this disk (0008002F) disk operation completed successfully after retry (00080030) disk operation completed successfully after crc correction (00080031) disk operation completed successfully after device recovery (00080032) data check found by ctlr on first mode sense OS / eventcount manager: (00090001) bad wait list on eventcount OS / level 1 process manager: (000A0001) illegal process id (000A0002) illegal lock (000A0003) process not suspended (000A0004) process already suspended (000A0005) process not bound (000A0006) process already bound (000A0007) bad atomic operation (000A0008) no pcb is available (000A0009) no stack space is available (000A000A) process not suspendable (000A000B) ready list is out of order (000A000C) bad deferred interrupt queue OS / terminal manager: (000B0001) buffer too small (000B0002) end of file entered from keyboard (000B0003) invalid output length (000B0004) invalid option passed to term_$control (000B0005) input buffer overrun - characters lost (000B0006) asynchronous fault occurred while waiting for input (000B0007) invalid line number supplied (000B0008) manual stop: type GG *+2 to continue (000B0009) character framing error (000B000A) character parity error (000B000B) data carrier detect (dcd) changed (000B000C) clear to send (cts) changed (000B000D) requested line or operation not implemented (000B000E) hangup fault (000B000F) speed incompatible with partner SIO line OS / DBUF manager: (000C0001) bad ptr (000C0002) bad free (000C0003) internal error OS / time manager: (000D0001) no timer queue entry (000D0002) entry to be cancelled not found (000D0003) quit while waiting for event (000D0004) bad timer interrupt (000D0005) bad timer key (000D0006) alarm fault (000D0007) real interval timer fault (000D0008) virtual interval timer fault (000D0009) queue element not in use (000D000A) queue element not found (000D000B) cpu time limit exceeded (000D000C) time adjustment out of range (000D000D) queue element already in use (000D000E) relative time is too large OS / naming server: (000E0002) directory is full (000E0003) name already exists (000E0004) invalid pathname (000E0005) invalid link (000E0006) not a link (000E0007) name not found (000E000A) invalid link operation (000E000B) invalid leaf (000E000C) node is unavailable (000E000D) bad directory (000E000E) branch is not a directory (000E000F) directory is not empty (000E0010) name is not a file (000E0011) illegal directory operation (000E0012) bad type (000E0013) no rights (000E0014) insufficient rights (000E0015) unable to delete system bootstrap (sysboot) (000E0016) directory is in use (locked) (000E0017) name server helpers clocks are skewed (000E0018) illegal request made of name server helper (000E0019) cannot find entry in replicated root (000E001A) last entry in replicated root returned (000E001B) name server helper is shutdown (000E001C) name server helper sent packet with errors (000E001D) clocks skewed (000E001E) cant find name server helper (000E001F) directory must be root (000E0020) directory not found in pathname (000E0021) too many components in pathname (000E0022) cache entry is stale (000E0023) cache entry was stale and was updated (000E0024) name server helper is uninitialized (000E0025) internal error (000E0026) bad request header version (000E0027) bad request code (000E0028) bad request body version (000E0029) request ignored (000E002A) directories not neighbors (000E002B) directory not local (000E002C) pathname truncated (000E002D) leaf truncated (000E002E) bad buffer size (000E002F) object is not an acl object (000E0030) volume has been mounted read-only (000E0031) write-protected volume prevents recovery of a damaged directory (000E0032) too many hard links exist to file (000E0033) directory object not found (000E0034) ran out of address space (000E0035) directory is corrupt OS / file server: (000F0001) object not found (000F0002) object is remote (000F0003) bad reply received from remote node (000F0004) communications problem with remote node (000F0005) object is not locked by this process (000F0006) object is in use (000F0007) illegal lock request (000F0008) lock violation detected (000F0009) local lock table is full (000F000A) remote lock table is full (000F000B) operation cannot be done from here (000F000C) no more lock table entries (000F000D) volume uid is unavailable (000F000E) locking files is blocked for this volume (000F000F) locking is already blocked for this volume (000F0010) no rights (000F0011) insufficient rights (000F0012) wrong type - can't operate on system objects (000F0013) objects are on different volumes (000F0014) invalid argument (000F0015) incompatible request (000F0016) volume has been mounted read-only (000F0017) network request requires new UID protocol OS / I/O manager: (00100001) controller not found (00100002) controller not in system (00100003) illegal interrupt id specified (00100004) interrupt id already in use (00100005) interrupt id not implemented for this bus (00100006) interrupt id table full (00100007) bad dcte length (00100008) illegal unit number (00100009) unit not acquired (0010000A) unit already in use (0010000B) unit table full (0010000C) illegal CSR address (0010000D) interrupt id already in use (0010000E) CSR page already in use (0010000F) CSR address already mapped (00100010) io map full (00100011) device failed self-test (00100012) boot device not found (00100013) interrupt stack error OS / network: (00110001) buffer error (00110002) out of pages (00110003) out of blocks (00110004) transmit failed (00110005) receive process failed to start (00110006) buffer queue is empty (00110007) remote node failed to respond to request (00110008) unable to route (00110009) network hardware error (0011000A) msg header too big (0011000B) unexpected reply type (0011000C) no more free sockets (0011000D) unknown request type (0011000E) request denied by local node (0011000F) request denied by remote node (00110010) bad checksum (00110011) too many transmit retries (00110012) socket not open (00110013) receive bus error (00110014) transmit bus error (00110015) bad asknode version number (00110016) memory parity error during transmit (00110017) unknown network (00110018) too many networks in internet (00110019) conflict with another node listing (0011001A) quit fault during node listing (0011001B) waited too long for more nodes to respond (0011001C) data length too large (0011001D) operation not defined on network hardware (0011001E) header length + data length exceeds max msg size (0011001F) no nodeid prom on this system (00110020) device stat block is not valid (00110021) device stat selection index is out of range (00110022) foreign node does not support all network features (00110023) attempt to transmit with invalid FROM ID (00110024) header data length exceeds max size allowed (00110025) extended network service delay (00110026) server ran out of queued service buffers OS / fault handler: (00120001) odd address error (00120002) illegal instruction (00120003) integer divide by zero (00120004) CHK instruction trapped - value out of range? (00120005) arithmetic overflow (00120006) privileged instruction violation (00120007) invalid SVC code (00120008) invalid SVC procedure name (00120009) undefined TRAP instruction (0012000A) unimplemented instruction (0012000B) protection boundary violation (0012000C) bus time-out (0012000D) invalid user stack pointer (0012000E) correctable memory error detected (0012000F) uncorrectable memory error detected (00120010) process quit (00120011) access violation (00120012) CPU B enabled with MMU valid bit reset (00120013) null process running on CPU B (00120014) OS-internal quit (with display return) (00120015) single step completed (00120016) invalid user-generated fault (subsystem code = 0) (00120017) fault in user-space interrupt handler for pbu device (00120018) process stop (00120019) process BLAST (0012001A) cache parity error (0012001B) PEB WCS parity error (0012001C) unimplemented SVC (0012001D) invalid stack format (0012001E) memory parity error (0012001F) process interrupt (00120020) supervisor fault while resource lock(s) set (00120021) spurious parity error (00120022) floating point inexact result (loss of significance) (00120023) floating point divide by zero (00120024) floating point underflow (00120025) floating point operand error (00120026) floating point overflow (00120027) process suspend fault (00120028) process suspend from keyboard (00120029) process suspend due to background read (0012002A) process suspend due to background write (0012002B) process continue fault (0012002C) fault(s) lost; process suspended or pfm_$enable/pfm_$inhibit mismatch? (0012002D) coprocessor protocol violation (0012002E) floating point branch/set on unordered condition (0012002F) floating point signalling not-a-number (00120030) invalid thread during parity error check (00120031) illegal page fault in user gpio interrupt routine (00120032) bus error while running on cpu B (00120033) spurious interrupt (00120034) unexpected bus error during system initialization (00120035) cleanup handler set (00120036) cleanup handler released out of order (00120037) ac power failure (00120038) fpx parity error (00120039) unknown fpa exception (0012003A) VME bus error on bus error (0012003B) AT bus parity error -- (I/O channel chk) (0012003C) Breakpoint (0012003D) Translate Error (0012003E) Illegal Lock (0012003F) Lock Timeout (00120040) Unknown Status (00120041) Floating Point Exception (00120042) A88K FPU Internal Error: Specific code in FPCSR<6:0> (00120043) pause interrupt received by cpu (00120044) halt interrupt received by cpu (00120045) trap occurred while already in trap mode (00120046) unaligned instruction (00120047) floating point hardware error -- incorrect data stored to memory (00120048) integer processor hardware error -- incorrect data stored to memory (00120049) bad bus error frame (0012004A) bus time-out during cache push (0012004B) AT-bus io-space protection violation (0012004C) registers corrupted by a trap handler (0012004D) owner trap on already-owned fp lo registers (0012004E) owner trap on already-owned fp hi registers OS / display driver: (00130001) invalid display unit number (00130002) specified font not loaded (00130003) internal font table full (00130004) invalid use of display driver procedure (00130005) font too large (00130006) error unloading internal (hdmt) table (00130007) invalid direction from SM (00130008) unexpected BLT in use (00130009) internal protocol violation (0013000A) too many pages to be wired (0013000B) unsupported font version # (0013000C) invalid buffer size (0013000D) error mapping display memory (0013000E) error borrowing display from screen manager (0013000F) unable to borrow - display in use (00130010) display borrow request denied by screen manager (00130011) error returning display to screen manager (00130012) can't return - display not borrowed (00130013) can't borrow both displays simultaneously (00130014) display already borrowed by this process (00130015) invalid position argument (00130016) invalid window limits argument (00130017) invalid length argument (00130018) invalid direction argument (00130019) invalid scroll displacement argument (0013001A) invalid blt mode register (0013001B) invalid blt control register (0013001C) invalid blt-done interrupt (0013001D) invalid interrupt routine state (0013001E) invalid screen coordinates in blt request (0013001F) font associated with specified id not mapped (00130020) display memory is already mapped (00130021) display memory is not mapped (00130022) quit while waiting (00130023) invalid cursor number (00130024) hidden display memory is full (00130025) quit while waiting (00130026) invalid eventcount key (00130027) operation not implemented on color display (00130028) non-conforming and main memory blts not implemented (00130029) invalid DM window id (0013002A) acquire denied because window is obscured (0013002B) no more direct mode window ID's available (0013002C) process not found (0013002D) pad/stream operations not allowed while display acquired (0013002E) display already acquired (0013002F) display acquire timed out (00130030) bad tracking rectangle (00130031) tracking list full (00130032) hidden memory does not exist (00130033) device not being used by specified process (00130034) process owning shared device has terminated OS / volume manager: (0014FFFF) Warning: disk is write protected (00140001) entry directory problems on logical volume (00140002) unable to dismount the boot volume (00140003) logical volume is not mounted (00140004) entry directory is not on specified logical volume (00140005) physical volume replaced since mount (00140006) volume table full (00140007) directory in use (00140008) volume in use for swapping (00140009) invalid argument (0014000A) end of volume table (0014000B) disk quotas not configured (0014000C) disk quota table full (0014000D) slow access times make volume unsuitable for swap space OS / calendar manager: (00150001) invalid syntax for date or time specification (00150002) date or time specification invalid (00150003) an empty string was passed to a decode routine (00150004) timezone specified is unknown (00150005) invalid time-zone difference OS / cross-process debug manager: (00160001) locate target spans multiple objects (00160002) locate target spans discontiguous segments (00160003) invalid state argument (00160005) not a debugger (00160006) debugger not found (00160007) debugger table full (00160008) requested state inapplicable to machine type (00160009) already a debugger (0016000A) target process not found (0016000B) no event posted for target - not suspended (0016000C) invalid ec key (0016000D) locate target has variable mmu access (0016000E) state unavailable for this event (0016000F) invalid control/inquire option (00160010) Mutually exclusive control options (00160011) superfluous or illegal target setup (00160012) target process is forking (00160013) target process is execing a program (00160014) target process is invokeing a program (00160015) target process is exiting (00160016) target process is loading an executable image (00160017) target process is vforking (00160018) call is ok (00160019) target process is unloading an executable image (0016001A) obsolete call issued OS / deferred execution module manager: (00170001) no more deferred execution queue slots (00170002) datum too large for deferred execution (00170003) wired dxm helper not currently supported OS / level 2 eventcount manager: (00180001) internal table exhausted (00180002) internal error (00180003) asynchronous fault occurred while waiting (00180004) bad eventcount (00180005) unable to allocate level 1 eventcount (00180006) level 1 eventcount not allocated OS / level 2 process manager: (00190001) process not found (00190002) not a level two process (00190003) bad stack base (00190004) request is for current process (00190005) suspend request timed out (00190006) process not suspended (00190007) process already suspended (00190008) child process terminated (00190009) another fault is pending for this process (0019000A) invalid process name (0019000B) bad eventcount key (0019000C) attempt to complete vfork on non-vforked process (0019000D) wait found no children (0019000E) process is a zombie (0019000F) no entries in level 2 process table (00190010) process is not a debug target (00190011) process is already a debug target (00190012) permission denied (00190013) internal error (00190014) process is already an orphan (00190015) process is a process group leader (00190016) another process is using this process group id (00190017) attempted to join a process group in a different session (00190018) unimplemented parameter passed to get/set_parm (00190019) illegal call to proc2_$free_asid OS / import/export manager: (001A0001) entry directory is not cataloged in the namespace (001A0002) files are locked on this volume (001A0003) specified entry directory not on this volume (001A0004) volume is not mounted OS / startup/shutdown: (001B0001) node ID mismatch (001B0002) checksumming already enabled (001B0003) no os paging file -- please run invol option 8 (001B0004) no calendar on system -- please boot over network (001B0005) CPU board below minimum revision level (001B0006) undefined interrupt (001B0007) cold start error (001B0008) system reboot (001B0009) exception handler is not longword-aligned (001B000A) cpu has unexpected cpu id in vbr reg (001B000B) timeout waiting for cpus to start OS / vfmt: (001C0001) unterminated control string (001C0002) invalid control string (001C0003) too few arguments supplied for read/decode (001C0004) field width missing on "(" designator (001C0005) encountered end of string where more text expected (001C0006) encountered null token where numeric token expected (001C0007) non-numeric character found where numeric was expected (001C0008) sign encountered in unsigned field (001C0009) value out of range in text string (001C000A) character in text string does not match control string (001C000B) terminator in text string does not match specified terminator OS / circular buffer manager: (001D0001) invalid block size requested (001D0002) quit while waiting (001D0003) buffer wrap-around error OS / pbu manager: (001E0001) ddf is larger then expected (001E0002) ddf has wrong version (001E0003) invalid unit number in ddf (001E0004) invalid csr page address in ddf (001E0005) csr page is in use (001E0006) initialization routine not in library (001E0007) cleanup routine not in library (001E0008) interrupt library too large (001E0009) interrupt routine not in library (001E000A) pbu not present (001E000B) too many pbu manager pages wired (001E000C) invalid unit number (001E000D) unit in use (001E000E) unit not acquired (001E000F) unit already acquired (001E0010) bad parameter (001E0011) no room in iomap (001E0012) requested iomap in use (001E0013) iomap already allocated (001E0014) iomap not allocated (001E0015) invalid iova (001E0016) buffer too large (001E0017) buffer page not wired (001E0018) buffer not mapped (001E0019) page already wired (001E001A) page wired too many times (001E001B) page not wired (001E001C) reference to csr page caused bus timeout (001E001D) trap 6 executed outside of interrupt routine (001E001E) invalid trap 6 code (001E001F) invalid usp at trap 6 (001E0020) protection violation (001E0021) unexpected interrupt from pbu device (001E0022) ddf has wrong file type (001E0023) too many wired pages (001E0024) csr not in device's csr page (001E0025) controller already mapped (001E0026) bad controller memory length (001E0027) bad buffer address (001E0028) interrupt library not found (001E0029) device library not found (001E002A) device is not a shared controller (001E002B) device not mapped (001E002C) pbu device got bus timeout on multibus (001E002D) all pbu units in use (001E002E) wrong version of /lib/pbulib in use (001E002F) interrupt level in use (001E0030) operation valid only for VME device (001E0031) physical address list too small (001E0032) function not supported for this device type (001E0033) illegal dma channel number (001E0034) bad dma direction specified (001E0035) requested dma channel in use (001E0036) requested dma channel not in use (001E0037) dma channel not at end of range (001E0038) no more eventcounts available (001E0039) eventcount not allocated to this unit (001E003A) unit already in use as a global device (001E003B) unit is publicly owned (001E003C) buffer pages not physically contiguous (001E003D) contiguous buffer not page aligned OS / line printer module: (001F0001) pna board not installed in system (001F0002) invalid string length (001F0003) invalid string termination (001F0004) line printer not acquired (001F0005) line printer already acquired (001F0006) internal error (001F0007) ppn list overflow - internal error (001F0008) line printer not assigned (001F0009) no line printer on system OS / OS info supplier: (00200001) array too small for complete table OS / badspot manager: (00210001) bad checksum in physical badspot block (00210002) bad count in physical badspot block (00210003) missing minus-one in physical badspot block (00210004) badspot list too small (00210005) no physical badspot blocks read or written (00210006) physical badspot list partially read or written (00210007) duplicate entry in badspot list (00210008) no physical badspot information on disk (00210009) bad daddr for lv label badspot extension block (0021000A) too many extensions to lv badspot list (0021000B) badspot extension uid <> logical volume uid (0021000C) manufacturer badspot list is corrupt (0021000D) illegal physical badspot list address specified OS / magtape manager: (0022FFFE) warning: tape not at load-point (0022FFFF) warning: tape unit is offline (00220001) invalid mt unit number (00220002) invalid mode field (00220003) invalid buffer length (00220004) invalid parameter (00220005) no PNA board installed in system (00220006) magtape unit is not connected (00220007) magtape not acquired (00220008) magtape unit is not ready (00220009) unit will not fit thru 25" hatch (0022000A) magtape unit in use (0022000B) magtape not initialized (0022000C) magtape already acquired (0022000D) invalid option (0022000E) too many outstanding operations (0022000F) invalid buffer address (00220010) invalid count for erase or space operation (00220011) tape drive is hung (00220012) ppn list overflow - internal error (00220013) config page in use - internal error (00220014) release problems - internal error (00220015) unexpected interrupt (00220016) operation attempted before waiting (00220017) wait attempted before go issued (00220018) go command issued while not in batch mode (00220019) header or buffer misalignment on chained r/w (0022001A) user quit while in mt_$wait (0022001B) timeout during wait or release (0022001C) header buffer not on header page (0022001D) no room from mt_$write - internal error (0022001E) info array (passed to mt_$wait) too small (0022001F) too many pages wired (00220020) too many pbu devices in use (00220021) buffer already wired (00220022) buffer not wired OS / ACL manager: (00230001) no right to perform operation (00230002) insufficient rights to perform operation (00230003) exit_super called more often than enter_super (00230004) wrong type - operation illegal on system objects (00230005) entry already exists (00230006) ACL is remote (00230007) ACL is on different volume than object (00230008) ACL protects wrong type of object (00230009) insufficient address space to open ACL (0023000A) required entry may not be deleted (0023000B) no entry - entry number too large (0023000C) image buffer too small or incorrect size (0023000D) ACL object not found (0023000E) ACL would be unchangeable (0023000F) object may not be readable by backup procedure (00230010) no right to set subsystem data or subsystem manager (00230011) project list is full - no more entries may be added (00230012) project list is too big - it cannot be added to object (00230013) ACL is full - no more entries may be added (00230014) Unused ACL status code (00230015) Unused ACL status code (00230016) Unused ACL status code (00230017) Unused ACL status code (00230018) Unused ACL status code (00230019) Unused ACL status code (0023001A) Unused ACL status code (0023001B) required entry missing from ACL (0023001C) attempt to issue unimplemented ACL call (0023001D) invalid selection for required entry (0023001E) invalid required entry (0023001F) may only setid to required entry (00230020) may not use setid in a default acl (00230021) invalid right supplied (00230022) extra field already in use - funky ACL's can't use OS / PEB manager: (00240001) fpu is hung (00240002) PEB interrupt (00240003) floating point overflow (00240004) floating point underflow (00240005) divide by zero (00240006) floating point loss of significance (00240007) floating point hardware error (00240008) attempted use of unimplemented opcode (00240009) wcs verify failed OS / network logging manager: (00250001) ppn list overflow OS / color display manager: (00260001) illegal caller (00260002) too many wired pages (00260003) virtual address not page aligned in color_$map (00260004) pages unmapped out of order (00260005) parameter value out of range (00260006) color display not available (00260007) instruction queue done wait timed out OS / vme bus manager: (00270001) undefined vme interrupt (00270002) vme bus error (00270003) ubus error caused by vme bus (00270004) iomap parity error (00270005) timeout on vme bus (00270006) bad request to enable routine (00270007) bad IO virtual addr specified OS / cartridge tape manager: (0028FFFA) warning: tape in write mode (0028FFFB) warning: tape in read mode (0028FFFC) warning: tape not at load-point (0028FFFD) tape at load point (0028FFFE) warning: tape unit is offline (0028FFFF) tape power on/reset (00280001) invalid ct unit number (00280002) unit not acquired (00280003) unit already acquired (00280004) unit in use (00280005) no tape controller on system (00280006) invalid buffer length (00280007) bad buffer alignment (00280008) invalid buffer address (00280009) unrecognized action type (0028000A) invalid operation count (0028000B) unit not ready (0028000C) unexpected ct interrupt (0028000D) quit waiting for i/o (0028000E) timeout waiting for i/o (0028000F) too many wired pages (00280010) no cartridge in drive (00280011) drive does not exist (00280012) tape is write protected (00280013) end of tape (00280014) read/write abort (00280015) read block error (00280016) read filler error (00280017) read no data (00280018) read no data and end of tape (00280019) read no data and load point (0028001A) filemark detected (0028001B) illegal drive command (0028001C) marginal block detected (0028001D) unrecognized drive status (0028001E) dma not at end of range (0028001F) dma underrun/overrun (00280020) memory parity error during dma (00280021) illegal controller command (00280022) controller timeout (00280023) controller diagnostic failed (00280024) unrecognized controller status (00280025) operation already in progress (00280026) operation not in progress OS / msg manager: (00290001) socket out of range (00290002) too deep (00290003) socket error (00290004) no more sockets (00290005) not owner (00290006) too much data (00290007) socket empty (00290008) socket in use (00290009) time out (0029000A) quit fault (0029000B) allocation failure OS / symbolic link manager: (002A0001) file not symbolic link type (002A0002) bad symbolic link file OS / internet routing: (002B0001) network port not open (002B0002) buffer queue for user port is full (002B0003) unknown network port (002B0004) can not create/delete that port type (002B0005) max number of ports already open (002B0006) routing service type not recognized (002B0007) port belongs to another process (002B0008) routing through-traffic queue overflow (002B0009) operation not legal on this port type (002B000A) unknown network device type (002B000B) no more buffer queues for user networks (002B000C) user network checksum failed (002B000D) bad packet length from user network (002B000E) unable to create through-traffic queue (002B000F) max number of USER ports already open (002B0010) bad request type asking for service change (002B0011) routing not allowed at port with 0 network ID OS / internet interface controller: (002C0001) IIC: dma got multibus read timeout error (002C0002) IIC: not initialized prior to operation (002C0003) IIC: transmitter underrun error (002C0004) IIC: undocumented interrupt raised (002C0005) IIC: hardware reset operation timed out (002C0006) IIC: self test failure reported by board init (002C0007) device already acquired (002C0008) device not acquired (002C0009) operation aborted (002C000A) device not in system (002C000B) remote device not acquired (002C000C) could get expected packet from receive socket (002C000D) could not allocate receive socket for device (002C000E) never got expected command completion interrupt (002C000F) wrong board revision level (002C0010) invalid command control block (002C0011) invalid receive control block OS / graphics processor manager: (002D0001) device not present in system (002D0002) device not available (002D0003) package not initialized (002D0004) package already initialized (002D0005) device not ready for PIO (002D0006) device timeout (002D0007) wait terminated by process fault (002D0008) error condition reported by GPU (002D0009) page fault interrupt (002D000A) illegal values for physical page use limits (002D000B) Programmed I/O command error (002D000C) DMA command execution error (002D000D) buffer already wired (002D000E) buffer too large (002D000F) no GPU microcode loaded (002D0010) error reported by draw processor OS / DMA manager: (002E0001) illegal channel (002E0002) illegal byte count (002E0003) channel in use (002E0004) channel not allocated for operation (002E0005) operation did not finish OS / IEEE 802.3: (002F0001) internal driver error (002F0002) feature is not implemented (002F0003) driver version mismatch (002F0004) device is off-line (002F0005) device is already on-line (002F0006) adapter hardware error (002F0007) transmit operation failed (002F0008) invalid unit number (002F0009) illegal packet length (002F000A) invalid statistics block (002F000B) packet type is already in use (002F000C) no channels are available (002F000D) no packet available for receive (002F000E) invalid packet type (002F000F) channel is not open (002F0010) address is not a multicast (002F0011) multicast list is full (002F0012) address is a multicast (002F0013) packet type is not already in use (002F0014) illegal destination address (002F0015) bad received packet OS / audit trail manager: (00300001) invalid data size (00300002) file already open (00300003) excessive event types (00300004) event logging is disabled (00300005) this process is not being audited (00300006) event type is not being audited (00300007) invalid action code (00300008) permission to perform action is denied (00300009) attempted to perform a redundant action (0030000A) could not start event logging (0030000B) file not open (0030000C) could not find audit event list (0030000D) not configured (0030000E) event logging already started (0030000F) event logging already stopped (00300010) event list format is not the current version (00300011) audit logging is enabled (00300012) could not locate audit directory OS / Ring: (00310001) feature is not implemented (00310002) invalid controller unit number (00310003) illegal header length (00310004) illegal data length (00310005) transmit operation failed (00310006) no packet available to receive (00310007) packet type is already in use (00310008) no channels are available (00310009) invalid svc packet type (0031000A) channel is not open (0031000B) device is off-line (0031000C) device is already on-line (0031000D) internal driver error (0031000E) controller hardware error (0031000F) packet type is not already in use (00310010) driver version mismatch (00310011) invalid statistics block (00310012) illegal destination address OS / Areas: (00320001) no free areas (00320002) area in use (00320003) cannot grow shared area (00320004) illegal area grow request (00320005) no free resources (00320006) area not active (00320007) not owner of area (00320008) cannot unmap area (00320009) no deactivatable pmaps (0032000A) internal error (0032000B) bad reserve OS / utility bus manager: (00330001) undefined interrupt (00330002) bus error interrupt (00330003) bus timeout (00330004) no response from gate array (00330005) error during interrupt cycle OS / pc/at bus manager: (00340001) undefined interrupt (00340002) bus error interrupt (00340003) pc/at bus-generated ubus error (00340004) iomap parity error (00340005) iocheck asserted on pc/at bus (00340006) pc/at bus refresh timeout (00340007) invalid request (00340008) invalid iova (00340009) invalid length (0034000A) pc/at bus not present (0034000B) no iomap present (0034000C) no dma channels present (0034000D) requested dma channel in use (0034000E) requested dma channel not in use (0034000F) dma not at end of range (00340010) illegal dma channel OS / terminal handler: (00350001) invalid option (00350002) invalid value for special function character (00350003) invalid handle (00350004) supplied buffer is too small (00350005) end of file (00350006) invalid output buffer length (00350007) quit while waiting for input (00350008) get conditional failed - no data available (00350009) input buffer overrun (0035000A) put conditional failed - no room for data (0035000B) timeout expired OS / serial I/O: (00360001) invalid option (00360002) illegal parameter value (00360003) invalid handle (00360004) character framing error (00360005) character parity error (00360006) data carrier detect (dcd) changed (00360007) clear to send (cts) changed (00360008) incompatible speed request (00360009) input buffer overrun (0036000A) quit while waiting OS / Ring 802.5: (00370001) internal driver error (00370002) feature is not implemented (00370003) driver version mismatch (00370004) device is off-line (00370005) device is already on-line (00370006) adapter hardware error (00370007) transmit operation failed (00370008) invalid unit number (00370009) illegal frame length (0037000A) invalid statistics block (0037000B) frame type is already in use (0037000C) no channels are available (0037000D) no frame available for receive (0037000E) invalid frame type (0037000F) channel is not open (00370010) frame type is not already in use (00370011) illegal destination address (00370012) size of receive buffer less than received frame (00370013) adapter is not open OS / SCSI manager: (00380001) SCSI bus not present (00380002) bad handle passed in call (00380003) device in use (00380004) device not acquired (00380005) device already acquired (00380006) bad parameter (00380007) buffer too large (00380008) page not wired (00380009) page already wired (0038000A) too many wired pages (0038000B) bad length (0038000C) bad buffer address (0038000D) unsupported function (0038000E) invalid iova (0038000F) device already allocated (00380010) operation timeout (00380011) hardware timeout (00380012) hardware failure (00380013) internal manager error (00380014) quit fault received during wait (00380015) all devices in use (00380016) illegal bus revision (00380017) protection violation (00380018) no resources available (00380019) command in progress (0038001A) DMA overrun (0038001B) DMA underrun (0038001C) parity error (0038001D) illegal command (0038001E) illegal data direction (0038001F) scsi target disconnected (00380020) scsi target not available (00380021) no such operation (00380022) host selected by another initiator (00380023) scsi bus reset detected (00380024) host illegally reselected (00380025) unknown message sent to host (00380026) illegal scsi bus phase (00380027) target is not a system device (00380028) illegal system device command (00380029) system device is busy (0038002A) ddf is larger then expected (0038002B) ddf has wrong version (0038002C) ddf has wrong file type OS / XNS Error Protocol: (00390001) source is broadcast address (00390002) illegal buffer specification (00390003) packet type error (00390004) cannot open to XNS IDP OS / MAC-independent interface: (003A0001) port operation not implemented (003A0002) no channels available (003A0003) packet type table full (003A0004) invalid packet type (003A0005) packet type in use (003A0006) no OS sockets available (003A0007) caller specified neither OS socket nor demux proc (003A0008) channel is not open (003A0009) no socket allocated for caller (003A000A) no packet available to receive (003A000B) data capacity too small for received packet (003A000C) illegal buffer specification (003A000D) invalid port version number (003A0010) could not put packet into socket (003A0011) invalid port number (003A0012) invalid type count (003A0013) illegal destination address OS / XNS IDP: (003B0001) no channels available (003B0002) no OS sockets available (003B0003) caller specified neither OS socket nor demux proc (003B0004) channel is not open (003B0005) no socket allocated for caller (003B0006) no packet available to receive (003B0007) data capacity too small for received packet (003B0008) illegal buffer specification (003B0009) address in use (003B000A) invalid type count (003B000B) listen network not connected (003B000C) illegal IDP socket (003B000D) IDP socket table full (003B000E) IDP socket in use (003B000F) OS socket not open (003B0010) no client for packet (003B0011) bad IDP checksum (003B0012) maximum hops exceeded by packet (003B0013) network unreachable (003B0014) illegal OS socket (003B0015) invalid version number (003B0016) could not put packet into socket (003B0017) no OS socket depth given (003B0018) cannot send only as well as listen (003B0019) cannot send only as well as connect (003B001A) cannot connect to broadcast address (003B001B) connection source address must be this node (003B001C) cannot connect as well as listen (003B001D) host address table full OS / Routing Information Protocol: (003C0001) network unreachable (003C0002) cannot open to XNS IDP OS / Apollo-private Protocol: (003D0001) could not put packet into socket OS / System Bus Manager: (003E0001) undefined interrupt (003E0002) unknown interrupt ID OS / Kernel Memory Allocator: (003F0001) internal error (003F0002) already allocated (003F0003) already free (003F0004) allocation failure OS / Thread Manager: (00400001) thread not found (00400002) thread termination in progress (00400003) bad thread state (00400004) thread not suspended (00400005) thread interrupted (00400006) thread info structure provided is too small (00400007) thread stop request timed out (00400008) thread stop requested while inhibited in user space OS / Recovered Disk Error Manager: (00410001) disk error recovered by device retry (00410002) disk error recovered by device crc (00410003) disk error recovered by some device action (00410004) disk error recovered by some OS action OS / Autochanger Manager: (00420001) attempt to use too many autochangers (00420002) autochanger did not return status page (00420003) surface not found in autochanger (00420004) transport is full (00420005) drive is missing a scsi address (00420006) ac drive is on a different bus (00420007) two drives have the same SCSI address (00420008) drive and ac controller have same SCSI address (00420009) medium has no source (00420010) invalid drive address (00420011) invalid drive bus (00420012) medium in drive has no source (00420013) autochanger jammed (00420014) invalid drive state in get_valid_surface (00420030) impossible case in calculate_scheduling_method (00420031) AC_DELAY and sreqp busy (00420032) deleting a non existant sreqq (00420033) deleting empty sreqq (00420034) bad drive state (00420035) all drives busy in get_drive (00420036) move and transport not busy (00420037) illegal operation in call_op (00420038) bad scheduling result (00420039) error in process_op (00420040) error in process_op recovery (00420041) error with memory allocation in init_req (00420042) error in init_sreq (00420043) drive spinup failed (00420044) user issued an illegal move (00420045) internal error: illegal error switch in dinit (00420046) internal error: continue for real error (00420047) internal error: illegal error switch in open_autochanger (00420048) internal error: illegal error switch in open_ac (00420049) an optical drive in the autochanger failed during OS initialization (00420050) hog time must exceed wait time (00420051) interrupt detected during operation (00420052) wait/hog time can not be negative (00420053) unknown autochanger control command (00420054) the system does not contain an autochanger OS / EISA bus Manager: (00430001) undefined interrupt (00430002) invalid iova (00430003) eisa bus not present (00430004) illegal dma channel (00430005) invalid dma count (00430006) requested dma channel in use (00430007) requested dma channel not in use (00430008) dma not at end of range (00430009) unsupported function (0043000A) internal error OS / DIO bus Manager: (00440001) undefined interrupt (00440002) invalid iova (00440003) invalid length (00440004) invalid argument (00440005) too many defined interrupts (00440006) internal error (00440007) hardware error (00440008) dio bus not present (00440009) unhandled interrupt (0044000A) dma not at end of range (0044000B) requested dma channel in use (0044000C) requested dma channel not in use (0044000D) dma address rolled over (0044000E) dma alignment error (0044000F) dma channel halted by reset (00440010) dma control changed during operation OS / Parallel Printer Interface: (00450001) parallel printer interface not present (00450002) device already acquired (00450003) invalid buffer length (00450004) bad handle in call (00450005) bad paramater in call (00450006) timeout waiting for device (00450007) async fault detected (00450008) internal manager error (00450009) spurious interrupt (0045000A) transfer error (0045000B) device timeout caused interface to be reset (0045000C) command not supported on this hardware (0045000D) bad buffer address (0045000E) end of read data stream OS / Kernel object manager: (00460001) internal error (00460002) object table full (00460003) unable to initialize (00460004) object kind mismatch OS / External Pager: (00470000) internal error (00470001) unimplemented function (00470002) timed out waiting for pager (00470003) invalid argument (00470004) access denied (00470005) out of resources (00470006) object not mapped (00470007) protocol mismatch (00470008) external pager already runniing (00470009) recursive external operation OS / FDDI Driver: (00480001) internal driver error (00480002) feature is not implemented (00480003) driver version mismatch (00480004) device is off-line (00480005) device is already on-line (00480006) adapter hardware error (00480007) transmit operation failed (00480008) invalid unit number (00480009) illegal frame length (0048000A) invalid statistics block (0048000B) frame type is already in use (0048000C) no channels are available (0048000D) no frame available for receive (0048000E) invalid frame type (0048000F) channel is not open (00480010) receive frame ignored: greater that 4500 bytes? (00480011) client's buffers too small for packet (00480012) fddi f/w file not found (00480013) the mac specified by client is WRAPPED (00480014) the mac specified by the client does not exist (00480015) the command queue to the controller is full OS / Queued file service: (00490000) Slow file service OK (00490001) Queue memory allocation error (00490002) Queued file service has not been enabled (00490003) Unable to allocate queue structures Streams Modules: (0101xxxx) stream manager / open (0102xxxx) stream manager / create (0103xxxx) stream manager / get_rec (0104xxxx) stream manager / get_prior_rec (0105xxxx) stream manager / seek (0106xxxx) stream manager / create_here (0107xxxx) stream manager / truncate (0108xxxx) stream manager / put_rec (0109xxxx) stream manager / replace (010Axxxx) stream manager / put_chr (010Bxxxx) stream manager / close (010Cxxxx) stream manager / delete (010Dxxxx) stream manager / inquire (010Exxxx) stream manager / redefine (010Fxxxx) stream manager / open_rec (0110xxxx) stream manager / pad_create (0111xxxx) stream manager / memory manager (0112xxxx) stream manager / get_conditional (0113xxxx) stream manager / internal module (0114xxxx) stream manager / get_ec (0115xxxx) stream manager / internal module get_fcb.sfcb (0116xxxx) stream manager / internal module get_fcb.pfcb (0117xxxx) stream manager / fork (0118xxxx) stream manager / dup (0119xxxx) stream manager / get_buf (011Axxxx) stream manager / alloc_sh_sk (011Bxxxx) stream manager / free_sh_sk (011Cxxxx) stream manager / init_sh_sk_pool (011Dxxxx) stream manager / bypass (011Exxxx) stream manager / force_write (011Fxxxx) stream manager / get_xp_buf (0120xxxx) stream manager / open_xp_buf (0121xxxx) stream manager / pad_init (0122xxxx) stream manager / replicate (0123xxxx) stream manager / force_unlock (0124xxxx) stream manager / switch (0125xxxx) stream manager / dump (0126xxxx) stream manager / get_uid (0127xxxx) stream manager / IOS (0128xxxx) stream manager / advisory_lock (0129xxxx) stream manager / sfcb Streams codes: (01xxFFF8) warning: new name added but cannot set protection (01xxFFF9) warning: a full record was not available (01xxFFFA) warning: supplied buffer too small (01xxFFFB) warning: new name added but cannot delete old name (01xxFFFC) warning: fix lgth recs & partial rec at EOF (01xxFFFD) warning: close anomaly (01xxFFFE) inquire warning - object open on multiple streams (01xxFFFF) warning: file trouble flag is set (01xx0000) unused (01xx0001) operation attempted on unopened stream (01xx0002) attempted operation illegal on this stream (01xx0003) "from" stream not open on switch request (01xx0004) no available target stream for switch (01xx0005) can't switch - no available stream ids (01xx0006) can't open stream to this object type (01xx0007) no more available streams (01xx0008) requested object is in use (01xx0009) end of file (01xx000A) ran out of address space (01xx000B) permanent files must have names (01xx000C) "put" of wrong length record (01xx000D) internal fatal error; table re-verify failed (01xx000E) file already exists (01xx000F) operation illegal with variable length records (01xx0010) unused (01xx0011) attempt to seek beyond beginning of file (key=0?) (01xx0012) character seek outside of current record (01xx0013) bad import - must be already open on stream elsewhere (01xx0014) count field for current record is in error (01xx0015) name not found (01xx0016) bad stream file header - checksum doesn't check (01xx0017) bad location parameter in create call (01xx0018) inquire error - can't open stream to this type of object (01xx0019) object already open on another stream by a different name (01xx001A) stream id out of range (01xx001B) unused (01xx001C) object not found even though name exists (01xx001D) unused (01xx001E) unused (01xx001F) attempted name change would require file move (01xx0020) object deleted while open on this stream (01xx0021) name required - open with no name is illegal (01xx0022) EOF pad put error - "put" legal only at EOF on pads (01xx0023) bad related pad - invalid or not open (01xx0024) unable to lock needed resources (01xx0025) this object type is illegal for pad create (01xx0026) internal memory management error - fatal (01xx0027) attempted write to read only stream (01xx0028) replace length error; record size cannot change (01xx0029) cannot redefine this attribute for a pad (01xx002A) manager cannot inquire/redefine one of the requested attributes (01xx002B) illegal attempt to open stream to remote device (01xx002C) no access rights to object (01xx002D) insufficient rights to object (01xx002E) invalid data in write to pad (01xx002F) internal table space error (01xx0030) move mode is needed - forced locate is on (01xx0031) illegal forced locate request - legal only for disk files (01xx0032) no more shared file cursors available on this node (01xx0033) internal error: shared file cursor has bad reference count (below zero) (01xx0034) internal error: export buffer too small (01xx0035) parameter combination illegal for this stream operation (01xx0036) couldn't find directory in pathname (01xx0037) system (or process) crash prevented complete file close (01xx0038) no stream found in conditional inquire (01xx0039) cannot open a remote sio line (01xx003A) cannot create file through a link (01xx003B) specified DSEE version does not exist (01xx003C) object is read-only (01xx003D) put conditional failed - no room for data (01xx003E) get conditional failed - no data available (01xx003F) not at record boundary (01xx0040) cannot change type as requested (01xx0041) opened for inquire only - operation failed (01xx0042) file not empty (01xx0043) buffer too big for object of this type (01xx0044) cannot initialize object of this type (01xx0045) flag not supported for this object type (01xx0046) advisory lock already set on this object (01xx0047) no advisory lock to unlock (01xx0048) not a directory (01xx0049) deadlock detected (01xx004A) file size limit exceeded (01xx004B) attempted read from write only stream (01xx004C) unused (01xx004D) unused (01xx004E) unused (01xx004F) unused (01xx0050) unused (01xx0051) unused (01xx0052) unused (01xx0053) unused (01xx0054) unused (01xx0055) unused (01xx0056) unused (01xx0057) unused (01xx0058) unused (01xx0059) unused (01xx005A) unused (01xx005B) unused (01xx005C) unused (01xx005D) unused (01xx005E) unused (01xx005F) unused (01xx0060) unused (01xx0061) unused (01xx0062) unused (01xx0063) unused (01xx0064) unused (01xx0065) char seek outside of current record illegal (01xx0066) unused (01xx0067) unused (01xx0068) unused (01xx0069) inquire for this object type not implemented display manager / DM process: (02010001) Command syntax error (02010002) Unknown command name (02010003) Too many command arguments (02010004) Position specification syntax error (02010005) Key definition incomplete (02010006) File not found (02010007) Unable to access file (02010008) Text is read-only (02010009) No text under cursor (0201000A) Too many windows (0201000B) Too many pads (0201000C) Display manager internal error #1 (0201000D) Unable to write new file (0201000E) You must finish current command input request before making another (0201000F) Key definition too long (02010010) Cursor is not in any window (02010011) Line too long - truncated (02010012) CC command requires position mark (02010013) Unable to create new process (02010014) Unable to create new pad (02010015) Input pads cannot be replicated (02010016) Bad font file (02010017) Font table full (02010018) Unknown function key name (02010019) Window too small for any text (0201001A) Display manager internal error #2 (0201001B) Pad deleted by client process (0201001C) Pad still active (0201001D) Illegal grow coordinates (0201001E) Display manager pads cannot be named (0201001F) File is not an ascii file (02010020) Processes still active (02010021) Bad text range (02010022) Paste buffer empty (02010023) Invalid regular expression pattern (02010024) Pattern too long (02010025) Illegal substitution expression (02010026) No match (02010027) DM input window cannot be deleted (02010028) No room for more text at that position (02010029) Invalid hexadecimal digit (0201002A) Invalid tabstop value (0201002B) Edit pad already open on that file (0201002C) File already modified (0201002D) No window selected for grow or move (0201002E) Line contains non-editable controls (0201002F) Cannot delete .bak file (02010030) Heap file inconsistent during recovery (02010031) A process with that name already exists (02010032) Search aborted (02010033) Operation illegal during search or substitute (02010034) Argument value out of range (02010035) User logging out (02010036) Error processing user_data/key_defs (02010037) Previous fatal error prevents typing (try RW -R) (02010038) Nothing left to UNDO (02010039) Command illegal except during node startup (0201003A) Can not create paste buffer (0201003B) You cannot edit this pad (0201003C) Pathname has changed -- close window and reread (0201003D) Can not edit that object type (0201003E) Invalid paste buffer name (0201003F) Operation is illegal on an icon (02010040) Maximum file size has been exceeded (02010041) Echo mode is already on; ABRT will end echoing (02010042) Echo mode aborted (02010043) Name does not correspond to a window (02010044) Command aborted (02010045) Command is not allowed during login (02010046) Logout has been disabled (02010047) Insufficient memory for operation. Try closing pads (02010048) Paste error (02010049) Previous attempt to read file failed. Try reopening (0201004A) Cannot set privileged environment variable (0201004B) Variable not defined (0201004C) Command illegal after login (0201004D) No balancing character found (0201004E) Too many open characters (0201004F) Too many close characters (02010050) Current color map usage prevents turning MONO off (02010051) Mailbox data not available; pad request lost. (02010052) Commands cdm and mono are mutually exclusive (02010053) Window no longer exists (02010054) Command illegal when WMGR -OFF (02010055) Command illegal in foreign windows (02010056) WARNING: Paste buffer is too large for undo buffer (02010057) Unable to save file until no one else is reading it (02010058) Command valid by super user only (02010059) Command disabled while window is offscreen (0201005A) Command illegal in obscured window & DM is not window manager (0201005B) Can't logout from DM. Use 'ex' to exit DM. (0201005C) Invalid display unit number (0201005D) -U option ignored when de-iconizing windows (0201005E) Loading user preferred key defs from ~/user_data/key_defs (0201005F) Insufficient rights for SHUT/EX (02010060) Command Illegal in Direct Window display manager / Heap manager: (02020001) heap table full (02020002) invalid length for heap get (02020003) invalid heap return (02020004) heap space already free on return display manager / Pad manager: (02030001) stream is not a pad (02030002) operation valid on input pads only (02030003) stream id out of range (02030004) operation attempted on unopened stream (02030005) operation valid on transcript pads only (02030006) pad not in raw mode (02030007) value out of range (02030008) too many fonts loaded in this pad (02030009) error loading font file (0203000A) unknown function key name (0203000B) only one input pad allowed per transcript (0203000C) illegal parameter combination (0203000D) existing pad must be an ascii file (0203000E) operation illegal with > 1 client process (0203000F) user aborted (WC -Q) edit operation (02030010) specified window number does not exist (02030011) window is no longer displayed (02030012) operation illegal on this type of pad (02030013) operation illegal when no display is attached (02030014) insufficient rights to perform DM command (02030015) invalid display unit number (02030016) pad not in frame mode display manager / Pbufs manager: (02040001) actual buffer type differs from specified type process manager / process manager: (03010001) invalid parameters to pm_$invoke (03010002) process had a fatal error (03010003) no space for Known Global Table (03010004) process already named (03010005) process has no name (03010006) error initializing global read/write storage (03010007) error allocating PFM error mask (03010008) too many libraries -- table space exceeded (03010009) mark/release list full (0301000A) process not found (0301000B) argument vector too large (0301000C) no static space available for process creation (0301000D) process name too long (0301000E) fork failed because more than one thread exists in the process (0301000F) fork failed because all the other threads are not suspended process manager / loader: (03030001) too many undefined globals (03030002) object module has too many sections (03030003) disk full or not enough address space to copy procedure text (03030004) file is incompatible with CPU type or OS revision, or isn't an executable (03030005) object module format is incompatible with this software release (03030006) not enough address space to map procedure (03030007) disk full or not enough address space for static storage (03030008) Known-Global-Table is full (03030009) reference to undefined global (0303000A) library contains unresolved global(s) (0303000B) peb required to execute this object module (0303000C) object module has unremovable breakpoints; rebind (0303000D) C library initialization required; no C library is installed (0303000E) DN160, DN460, or DN660 required to execute this object module (0303000F) FPU required to execute this object module (03030010) M020 series node required to execute this object module (03030011) Cross rev. incompatibility, sr9.5 code calling pre-sr9.5 code (03030012) load address already occupied (03030013) absolute load address already occupied (03030014) absolute object module requires relocation (03030015) conflicting loader options and requirements (03030016) unable to install a library required by object module (03030017) FPA board required to execute this object module (03030018) reached the end of the executable image list (03030019) invalid image handle (0303001A) invalid section number (0303001B) object module requires link step (0303001C) object module requires unsupported systype (0303001D) load in progress while table being examined (0303001E) compound executable contains no module for machine type (0303001F) object module systype sys3 obsolete; see sr10 release notes (03030020) load context requires position independent code (03030021) load context precludes unload (03030022) pre-sr10 obj files cannot be loaded at sr11 (03030023) standards-compliance required by executable is unavailable process manager / process fault manager: (0304FFFF) warning - multiple debugger fault handlers are in use (03040001) cleanup handler released out of order (03040002) invalid cleanup record (03040003) cleanup handler established successfully (03040004) pfm_$cleanup_set was signalled (03040005) no rws space to create static cleanup handler (03040006) static cleanup handler not found (03040007) attempt to release non-existent fault handler (03040008) attempt to release fault handler at wrong level (03040009) unable to locate static fork handler (0304000A) stranded or corrupted cleanup handler record (0304000B) unable to unwind stack because of invalid stack frame (0304000C) ada exception detected (0304000D) pthread canceled asynchronously process manager / program manager: (03050001) argument does not exist (03050002) argument is too big for supplied buffer (03050003) stream vector is too large (>32) (03050004) not a program (03050005) process is vforked (03050006) incompatible invocation options (03050007) illegal option (03050008) option requires an argument (03050009) no entry point (0305000A) process is running on signal stack (0305000B) wrong object module format process manager / mapped segment manager: (03060001) unsupported access rights requested (03060002) attempt to release segment mapped by previous level (03060003) no object mapped at virtual address supplied (03060004) object already locked in a way that precludes your requested use (03060005) not enough address space available (03060006) bad length (03060007) object not found (03060008) no rights (03060009) insufficient rights (0306000A) operation illegal: objects are on different volumes (0306000B) operation illegal: object is not temporary (0306000C) operation illegal: object is not locked properly (0306000D) unable to map non-native object (0306000E) operation illegal: object is not a file process manager / r/w storage manager: (03070001) attempt to release non-heap entry using rws_$release_heap (03070002) attempt to release heap entry created at earlier program level (03070003) heap corruption detected; block header incorrect (03070004) heap corruption detected; level number in free block incorrect (03070005) attempt to release heap entry not allocated from this pool (03070006) requested rws_$pool_t out of range (03070007) unable to allocate because of lack of resources process manager / basic heap storage manager: (03080001) attempt to release already released heap storage (03080002) out of heap space (03080003) heap corruption detected; block header incorrect (03080004) requested too large an area from baf process manager / remote process manager: (03090001) unable to read naming and working directories (03090002) unable to resolve home text (03090003) unable to get SID (03090004) operation not supported by remote system (03090005) no more slots available to spawn remote process (03090006) unknown request (03090007) no more resources (03090008) mbx open failed on remote node (03090009) request timed out (0309000A) sid authentication check failed (0309000B) invalid to specify -me and -login (0309000C) local locksmiths only are allowed (0309000D) command line too long (0309000E) crp -me not allowed by remote system process manager / task manager: (030A0001) not enough virtual memory left to create task (030A0002) task does not exist (030A0003) task manager has not been initialized (030A0004) task exited (030A0005) invalid task handle (030A0006) internal error: bad status from ec2_$wait (030A0007) attempt to blast the distinguished task (030A0008) a task attempted to blast itself (030A0009) invalid task priority (030A000A) a foreground task attempted to create a background task (030A000B) internal error: ddslib initialization failed (030A000C) invalid task lifetime (030A000D) this process has the max # of tasks allowed - no more may be created (030A000E) task name is too long (030A000F) task does not have a completion EC (030A0010) task has not yet completed (030A0011) a task stack overflowed (030A0012) a task stack was corrupted process manager / secondary stack storage manager: (030B0001) attempt to release to null mark (030B0002) attempt to release to mark not contained in secondary stack (030B0003) attempt to release to invalid mark (030B0004) attempt to release to mark contained in unallocated storage (030B0005) unable to allocate secondary stack storage (030B0006) unable to deallocate secondary stack storage (030B0007) unable to unwind secondary stack frame process manager / CMA: (030C0001) Thread has been alerted - forced thread termination in progress (030C0002) Object referenced does not currently exist (030C0003) Object referenced is already in use (030C0004) Requested operation is improperly invoked (030C0005) Data or object could not be referenced by CMA operation (030C0006) Parameter to CMA operation is improper (030C0007) Operation failed due to insufficient quota (030C0008) Attempted stack overflow was detected (030C0009) Insufficient virtual memory for requested CMA operation (030C000A) Insufficent privilege for requested operation (030C000B) Internal error detected in CMA (030C000C) An assertion check has failed (030C000D) Current thread has been requested to exit (030C000E) No space is currently available to create a new stack (030C000F) No space is currently available to process an AST request (030C0010) Timed condition wait expired (030C0011) Normal successful completion (030C0012) Exception raised, address of exception object !XL (030C0013) Exception raised, VMS condition code follows (030C0014) Uninitialized exception raised (030C0015) Unimplemented CMA feature (030C0016) CMA initialization is already in progress (030C0017) Unhandled "illegal instruction" signal (030C0018) Unhandled "trace or breakpoint trap" signal (030C0019) Unhandled "IOT trap" signal (030C001A) Unhandled "EMT trap" signal (030C001B) Unhandled "floating point exception" signal (030C001C) Unhandled "bus error" signal (030C001D) Unhandled "segmentation violation" signal (030C001E) Unhandled "bad system call" signal (030C001F) Unhandled "broken pipe" signal (030C0020) Unhandled "CPU-time limit exceeded" signal (030C0021) Unhandled "file-size limit exceeded" signal (030C0022) The current stack was not allocated by CMA (030C0023) Unhandled "integer overflow trap" exception (030C0024) Unhandled "integer divide by zero trap" exception (030C0025) Unhandled "floating point overflow trap" exception (030C0026) Unhandled "floating point/decimal divide by zero trap" exception (030C0027) Unhandled "floating point underflow trap" exception (030C0028) Unhandled "decimal overflow trap" exception (030C0029) Unhandled "subscript out of range trap" exception (030C002A) Unhandled "floating point overflow fault" exception (030C002B) Unhandled "floating point divide by zero fault" exception (030C002C) Unhandled "floating point underflow fault" exception (030C002D) Unhandled "reserved addressing fault" exception (030C002E) Unhandled "privileged instruction fault" exception (030C002F) Unhandled "reserved operand fault" exception US / file utility: (04010001) object must be a leaf (04010002) unrecognized sys_type returned from file_$attributes (04010003) unrecognized entry type returned from naming server (04010004) unable to replace or delete a system directory (04010005) compare failed (04010006) destination directory is contained within source directory (04010007) can't copy a file or tree to itself (04010008) source and destination are on different disk volumes (04010009) source directory is contained within destination directory (0401000A) pathname truncated (0401000B) leaf truncated US / print utility: (0402FFFB) Printer fault (0402FFFC) Printer is out of paper (0402FFFD) job queued, but print server suspended (0402FFFE) job queued, but print server not running (0402FFFF) Printer is offline (04020001) ./sys/print directory not found (04020002) print queue directory specified by link was not found (04020003) file to be printed is not an ascii text file (04020004) file to be printed is corrupted (04020005) prflib option is unknown (04020006) prflib option value is incorrect (04020007) more than 1 file found with prflib search option (04020008) file type can not be printed (04020009) problem with PostScript interpreter (0402000A) file can not be printed on this printer (0402000B) printer extension value incorrect (0402000C) printer extension value > 9 (0402000D) target invalid (0402000E) specified printer does not exist (0402000F) no jobs queued for specified printer (04020010) operation illegal : queue is not empty (04020011) max number of jobs queued (04020012) print job is active (04020013) print server already registered with specified ext value (04020014) illegal print server signal type (04020015) communications failure. Try again. (04020016) no entry in database for specifed key (04020017) wrong type specified for key (04020018) read error in print server driver (04020019) write error in print server driver (0402001A) error creating I/O connection (0402001B) data in print server database corrupted (0402001C) error closing I/O connection (0402001D) internal error in print server driver (0402001E) read error in print server filter (0402001F) write error in print server filter (04020020) open error in print server filter (04020021) format error in print server filter (04020022) input object type incorrect for this filter (04020023) unable to allocate memory (04020024) printer with this name already exists (04020025) user terminated print job (04020026) user suspended print job (04020027) print job duplicate from pre10q daemon (04020028) can not find specified print manager (04020029) no printers registered to print manager US / DB: (04030001) normal exit from debugger US / object module IO: (04040001) too many IO channels in use (04040002) channel is not open (04040003) get or put outside file (04040004) ran out of free read/write storage (04040005) cannot open another temporary file; one is already opened (04040006) requested object file name exists and is not an object US / TU58 tape: (04050001) bad block number (04050002) invalid op code (04050003) motor stopped (04050004) seek error (04050005) data check (04050006) write protected (04050007) no cartridge (04050008) bad unit number (04050009) end of tape (0405000A) failed self-test US / sio: (04060001) object on this stream is not sio line (04060002) bad option parameter (04060003) illegal stream id (04060004) stream not open (04060005) speed incompatible with partner SIO line US / pattern matcher: (04070001) too many tag specifiers ("{ }") (04070002) too many end-tag characters ("}") (04070003) missing end-class character ("]") (04070004) invalid use of closure ("*") (04070005) missing end-tag character ("}") (04070006) pattern too big to fit in supplied buffer (04070007) invalid escape sequence (04070008) bad pattern (04070009) given string and pattern do not match (0407000A) output string too small US / wildcard processor: (04080001) can't get free space for pathname (04080002) invalid wildcard length (04080003) invalid wildcard name (04080004) invalid use of directory closure ("*" or "+") (04080005) too many components (04080006) internal error #1 (04080007) circular link detected (04080008) first name found (04080009) excess end tags ("}") in wildcard (0408000A) missing end tags ("}") in wildcard US / font manager: (04090001) font table is full (04090002) bad font file (04090003) unrecognized font version # (04090004) bad font id argument (04090005) bad value id (04090006) character is not in font (04090007) free storage space full (04090008) character is too large (04090009) descriptor or header value is out of range (0409000A) invalid character code (0409000B) no character image (0409000C) font is read-only (0409000D) one or more images are required (0409000E) font table is full US / shell: (040A0001) shell lexer has failed - unable to recognize input (040A0002) parse tree has been corrupted - unable to recover (040A0003) unable to allocate space for parse tree (040A0004) wrong file type - can only execute object and text files (040A0005) program not found (040A0006) inlib command obsolete; relink program with inlib option (040A0007) insufficient rights US / aclm: (040B0001) no right to perform operation (040B0002) insufficient rights to perform operation (040B0003) exit_super called more often than enter_super (040B0004) wrong type - operation illegal on system objects (040B0005) entry already exists (040B0006) ACL is remote (040B0007) ACL is on different volume than object (040B0008) ACL protects wrong type of object (040B0009) insufficient address space to open ACL (040B000A) required entry may not be deleted (040B000B) no entry - entry number too large (040B000C) image buffer too small or incorrect size (040B000D) ACL object not found (040B000E) ACL would be unchangeable (040B000F) object may not be readable by backup procedure (040B0010) no right to set subsystem data or subsystem manager (040B0011) project list is full - no more entries may be added (040B0012) project list is too big - it cannot be added to object (040B0013) ACL is full - no more entries may be added (040B0014) invalid right name (040B0015) invalid person identifier (040B0016) invalid project identifier (040B0017) invalid organization ID (040B0018) invalid node ID (040B0019) non-existent SID (040B001A) subsystem name not found (040B001B) required entry missing from ACL (040B001C) attempt to issue unimplemented ACL call (040B001D) invalid selection for required entry (040B001E) invalid required entry (040B001F) may only setid to required entry (040B0020) may not use setid in a default acl (040B0021) invalid right supplied US / uvtoc: (040C0001) object is not a local entry directory (040C0002) no available address space (040C0003) end of vtoc US / cl: (040D0001) Argument too long (040D0002) Too many arguments follow keyword (040D0003) Not enough arguments follow keyword (040D0004) Invalid decimal number (040D0005) No match for wildcard (040D0006) Missing required derived name (040D0007) Unrecognized or redundant keyword (040D0008) Duplicate set element (040D0009) Invalid set element US / bin_tree: (040E0001) unable to allocate rws space (040E0002) end of list (040E0003) not found library / open: (05010001) do not provide name for SCRATCH file (05010002) need name of file to open (05010003) invalid STATUS= option (05010004) direct access not allowed with variable length records (05010005) given record length is not compatible with this file (05010006) need record length > zero (05010007) invalid ACCESS= option (05010008) invalid FORM= option (05010009) invalid UNIT= specifier (0501000A) no space to create requested IO unit (0501000B) FORM= option value not compatible with this file (0501000C) BLANK= option not allowed for unformatted file (0501000D) invalid BLANK= option (0501000E) unrecognized special name beginning with "-" (0501000F) command line arguments are named ^1 thru ^9 (05010010) file not found library / close: (05020001) KEEP status not allowed for SCRATCH file (05020002) invalid STATUS= option (05020003) can't delete file library / mark/release: (05030001) cannot find old Fortran IO state record library / IO: (05040001) no space to create IO unit (05040002) unit is not connected (05040003) recursive use of FORTRAN IO (05040004) direct access not allowed to sequential file (05040005) need record number for direct access (05040006) invalid option(s) used to reference internal file (05040007) feature not implemented yet (05040008) end of file (05040009) unformatted operation not allowed on file opened for formatted IO (0504000A) formatted operation not allowed on file opened for unformatted IO (0504000B) not enough virtual address space left to perform requested operation library / IO transfer: (05050001) Internal format error (05050002) No edit specifier in format (05050003) Improper character in input data (05050004) Real exponent too large (05050005) Improper format descriptor for variable type (05050006) Data overflows buffer size (05050007) Not enough data in input record library / read: (05060001) end of file (05060002) record is larger than available buffer (05060003) = expected (05060004) name not found in namelist (05060005) ) expected (05060006) integer expected as an array subscript (05060007) ( expected (05060008) number expected (05060009) , expected (0506000A) array variable expected (0506000B) subscript out of bounds (0506000C) unknown high dimension on array variable library / write: (05070001) nyi library / position: (05080001) no space to create unit (05080002) unit is not connected (05080003) recursive IO library / floating point: (05090001) overflow in add/sub (05090002) underflow in add/sub (05090003) loss of significance in add/sub (05090004) overflow in multiply (05090005) underflow in multiply (05090006) overflow in divide (05090007) underflow in divide (05090008) division by zero (05090009) overflow in convert to word integer (0509000A) overflow in convert to long integer (0509000B) overflow in dp add/sub (0509000C) underflow in dp add/sub (0509000D) loss of significance in dp add/sub (0509000E) overflow in dp multiply (0509000F) underflow in dp multiply (05090010) overflow in dp divide (05090011) underflow in dp divide (05090012) dp division by zero (05090013) overflow in convert double to single (05090014) underflow in convert double to single (05090015) square root of a negative number (05090016) overflow in exp function (05090017) overflow in dp exp function (05090018) arg of log function less than or equal to zero (05090019) dp arg of log function less than or equal to zero (0509001A) underflow in exp function (0509001B) underflow in dp exp function (0509001C) attempt to raise sp zero to a power <= zero (0509001D) attempt to raise sp negative number to a real power (0509001E) attempt to raise dp zero to a power <= zero (0509001F) attempt to raise dp negative number to a real power (05090020) both arguments zero in sp atan2 (05090021) both arguments zero in dp atan2 (05090022) overflow in sp x**y (05090023) overflow in dp x**y (05090024) underflow in sp x**y (05090025) underflow in dp x**y (05090026) loss of significance in sp tan - argument too large (05090027) loss of significance in dp tan - argument too large (05090028) loss of significance in sp sin - argument too large (05090029) loss of significance in dp sin - argument too large (0509002A) loss of significance in sp cos - argument too large (0509002B) loss of significance in dp cos - argument too large (0509002C) argument out of range (0509002D) invalid op code (0509002E) unsupported function for this hardware configuration library / inquire: (050A0001) cmd line args are named ^1 thru ^9 (050A0002) recursive io (050A0003) target string too small library / format: (050B0001) left parenthesis expected (050B0002) right parenthesis expected (050B0003) period expected (050B0004) comma, colon, slash, or right parenthesis expected (050B0005) unsigned integer constant expected (050B0006) p format not followed by f, e, d, or g (050B0007) bad hollerith or character constant (050B0008) unrecognized format specifier library / tfp: (050CFFFF) computed block count doesn't match that in EOF label (050C0001) volume not found (050C0002) volume not open (050C0003) volume already open (050C0004) file not open (050C0005) file already open (050C0006) file not found (050C0007) tape i/o error (050C0008) end of volume encountered (050C0009) invalid file section value (050C000A) invalid file sequence value (050C000B) invalid generation number value (050C000C) invalid generation version number value (050C000D) invalid block count value (050C000E) invalid block length value (050C000F) invalid record length value (050C0010) invalid buffer offset value (050C0011) no tcb is available (internal table full) (050C0012) invalid unit number (050C0013) first label on volume is not VOL1 label (050C0014) label version number in VOL1 label is not "3" (050C0015) tape drive is already in use by this process (050C0016) end of file (050C0017) tape limit: eot/bot marker encountered (050C0018) label size is in error; not 80 characters (050C0019) block size is too large (050C001A) invalid record format specifier (050C001B) unlabeled operation attempted on a labeled volume (050C001C) labeled operation attempted on an unlabeled volume (050C001D) invalid volume id (050C001E) conflicting blocking information (050C001F) file does not exist on this volume (050C0020) internal or exception procedure returned bad new-volume info (050C0021) a HDR1 label is missing where one is required (050C0022) an EOF1 (or EOV1) label is missing where one is required (050C0023) a double filemark was encountered unexpectedly (050C0024) inconsistent file sequence numbers (050C0025) file sequence number tracking error (050C0026) read attempted on file open for writing (050C0027) write attempted on file open for reading (050C0028) block list size is invalid (050C0029) an EOV1 (or EOF1) label is missing where one is required (050C002A) wrong volume, file header is inconsistent with previous trailer (050C002B) operation not started due to error in previous block list (050C002C) record i/o attempted on volume open for block i/o only (050C002D) variable record with invalid record control word encountered (050C002E) spanned record with invalid segment control word encountered (050C002F) erroneous spanning indicator or segment out of sequence encountered (050C0030) invalid mode set passed to tfp_$set_mode (050C0031) cannot read mt status - wait is required (050C0032) more info returned from mt_$wait that expected (050C0033) attempt to enqueue too many operations (050C0034) magtape is offline or floppy is not ready (050C0035) wait not performed before go (050C0036) go called with no work to do (050C0037) invalid operation code (050C0038) OS magtape manager out of pb's (050C0039) wait called when not required (050C003A) OS magtape manager didn't purge ops on error (050C003B) # ops executed does not match # ops completed (050C003C) i/o error recovery failed (050C003D) invalid recovery value returned by execption handler (050C003E) zero length block list unexpected (050C003F) tape rewind error (050C0040) tape space-record error (050C0041) tape space-filemark error (050C0042) tape write-filemark error (050C0043) tape or floppy is write-protected (050C0044) redundant call to wire i/o buffers (050C0045) attempt to already-unwired i/o buffers (050C0046) unable to re-open volume; current position is unknown (050C0047) unable to re-open volume; info file is bad (050C0048) tape read-foreign error (050C0049) cannot write at this tape position (050C004A) unexpected sysboot error (050C004B) unknown rmt error (050C004C) rmt tape blank or offline (050C004D) rmt tape is blank (050C004E) rmt tape is write protected or is offline (050C004F) rmt tape is offline (050C0050) rmt tape is write protected or at end-of-tape (050C0051) rmt tape is at end-of-tape (050C0052) rmt open failed (050C0053) rmt prevailing write error (050C0054) rmt unsupported operation library / Pascal: (050D0001) too many open files (050D0002) use of unopened file (050D0003) REWRITE required before writing to file (050D0004) RESET required before reading from file (050D0005) read past end of file (050D0006) real exponent too large (050D0007) invalid operation on file (050D0008) invalid OPEN parameter (050D0009) inconsistent file usage (050D000A) invalid read data (050D000B) internal error; invalid I/O key type (050D000C) attempt to DISPOSE a NIL pointer (050D000D) attempt to DISPOSE block of memory of zero or negative size (050D000E) attempt to DISPOSE pointer to memory that was previously DISPOSEd (050D000F) index outside of string bounds (050D0010) overflow beyond maximum size of string (050D0011) invalid write data (050D0012) unable to DISPOSE pointer; pointer may be previously DISPOSEd or not allocated library / MBX manager: (050E0001) size parameter too large (050E0002) size parameter too small (050E0003) too many channels (050E0004) illegal mbx handle (050E0005) file already in use (050E0006) no room in channel (050E0007) msg too big for channel (050E0008) no active servers (050E0009) open rejected (050E000A) end of file (050E000B) no available channels (050E000C) channel not open (050E000D) unexpected control message received (050E000E) remote transmit failed (050E000F) remote reply wait timed out (050E0010) unused (050E0011) invalid mbx handle (050E0012) wrong mbx version number (050E0013) unknown remote request (050E0014) remote service denied (050E0015) channel empty (050E0016) supplied buffer too small (050E0017) unused (050E0018) no more resources available (050E0019) bad key (050E001A) returned data does not complete a record (050E001B) unused (050E001C) interrupt data received (050E001D) another interrupt is already pending on this channel (050E001E) client and server cannot be same process (050E001F) client timed out while waiting for open to complete (050E0020) error occurred during network sequenced send (050E0021) server node mbx_helper has no rights to server mbx (050E0022) client has no rights to local mbx_helper sysmbx (050E0023) server record header conflicts with buffer length (050E0024) local mbx_helper not running and couldn't be started (050E0025) no remote mbx_helper running (050E0026) client has no rights to server mailbox library / ptx plot package: (050F0001) image too small in the x-dimension (050F0002) image too small in the y-dimension (050F0003) invalid value for horizontal start library / floppy seq i/o manager: (0510FFFE) warning: record truncated (0510FFFF) warning: disk almost full (05100001) invalid floppy unit # (05100002) floppy is full (05100003) control block is too large (05100004) end of file (05100005) end of tape (05100006) unit is already open (05100007) unit is not open (05100008) attempted write on read-only floppy (05100009) invalid marker specification (0510000A) data error: filler expected where none was found (0510000B) data error: filler found where not expected (0510000C) data error: invalid control code (0510000D) data error: record trailer missing (0510000E) data error: record trailer doesn't match header (0510000F) beginning of tape (05100010) data error: beginning of tape found where unexpected (05100011) floppy is physically write-protected (05100012) floppy is not ready (05100013) invalid label record -- probably not written with WBAK library / Ethernet driver: (05110001) controller does not exist (05110002) invalid ethernet controller number (05110003) controller not online (05110004) invalid buffer size parameter (05110005) invalid statistics type (05110006) invalid mode parameter (05110007) invalid options parameter (05110008) illegal number of addresses (05110009) address is not a valid group address (0511000A) no receive available (0511000B) quit while waiting (0511000C) receive packet truncated (0511000D) too many collisions (0511000E) device timed out (0511000F) operation failed (05110010) internal frame header invalid (05110011) internal dma length error (05110012) unexpected status from device (05110013) diagnostic ram test failed (05110014) diagnostic dma test failed (05110015) diagnostic transmitter test failed (05110016) diagnostic receiver test failed (05110017) diagnostic loopback test failed (05110018) DDF version is obsolete (05110019) DMA/PIO did not complete (0511001A) service is not implemented in this driver (0511001B) adaptor reported no resources available (0511001C) adaptor self-test failed (0511001D) No packet type set for this process (0511001E) Packet types are already set for this process (0511001F) Ethernet unit is shared with other processes (05110020) Ethernet driver master lock timeout (05110021) Packet type already in use by another process (05110022) Internal error -- unable to allocate control block (05110023) Internal error -- unable to open socket (05110024) Unable to allocate receive buffers (05110025) Bad argument to ethernet routine (05110026) Ethernet device lock timeout library / ikon driver: (05120001) invalid action code (05120002) invalid buffer size (05120003) no PBU or Ikon controller is installed (05120004) device is offline (05120005) device is out of paper (05120006) device fault (05120007) device is busy library / pipe manager: (05130001) supplied buffer too large (05130002) pipe is empty (05130003) pipe is full (05130004) illegal pipe operation (05130005) pipe has no readers (05130006) pipe has no writers (05130007) pipe could not be locked library / amlc manager: (05140001) controller does not exist (05140002) bad unit number library / streams-magtape manager: (05150001) object is not a magtape file descriptor (05150002) magtape file descriptor contains invalid data (05150003) invalid attribute specifier (05150004) invalid creation/expiration date (05150005) invalid record format (05150006) descriptor file is read-only (05150007) invalid unit number (05150008) invalid file sequence number (05150009) invalid file section number (0515000A) invalid block length (0515000B) invalid record length (0515000C) invalid generation number (0515000D) invalid generation version number (0515000E) invalid buffer offset (0515000F) magtape volume is in use (05150010) attempt to label unlabeled volume library / streams-directory manager: (05160001) unrecognized mode (05160002) size parameter too small (05160003) too many channels library / ipc socket manager: (05170001) range error (05170002) too deep (05170003) socket error (05170004) no more sockets (05170005) not owner (05170006) too much data (05170007) socket empty (05170008) not ipc object (05170009) socket not open (0517000A) socket already open (0517000B) time out library / traceback utilities: (0518FFFF) warning: guessed return address (05180001) pc not in known code (05180002) invalid object module version (05180003) no debug table entry for routine (05180004) no debug info available for routine (05180005) frame type illegal for operation (05180006) routine has no arguments (05180007) specified argument does not exist (05180008) no stack frame exists for routine library / spe driver: (05190001) SPE controller or SW not installed (05190002) controller not initialized (05190003) device is busy (05190004) device is offline (05190005) device is out of paper (05190006) device fault (05190007) invalid sio line (05190008) controller already initialized (05190009) error in interrupt handler library / analog/digital driver: (051A0001) Buffer length limited to 1024 bytes (051A0002) Attempt to allocate or declare too many buffers (051A0003) System cannot create the new buffer (051A0004) Attempt to use a buffer that is not declared (051A0005) Attempt to link a buffer already on xfer list (051A0006) Declared buffers must not cross 1024-byte bndry (051A0007) Declared buffer address must be word-aligned (051A0008) Converter clock set too fast or too slow (051A0009) A/D channel list limited to 16 entries (051A000A) Valid A/D channel numbers are 0 through 15 (051A000B) Buffer was not ready in time for DMA transfer (051A000C) Clocks or triggers too fast (051A000D) Operation took longer than the time out interval (051A000E) Waiting for buffer already released (051A000F) Waiting for buffer not in transfer (051A0010) Converter hardware not present (051A0011) Unable to convert value given library / compound executables manager: (051B0001) bad compound executable format (051B0002) specified module not found in compound executable graphics / primitives: (06010001) Primitives not initialized (06010002) Primitives already initialized (06010003) Wrong display hardware (06010004) Operation illegal for DM frame (06010005) Must borrow display for this operation (06010006) No attributes defined for bitmap (06010007) No more bitmap space available (06010008) Dimension too big (06010009) Dimension too small (0601000A) Bad bitmap descriptor (0601000B) Bad attribute block descriptor (0601000C) Window origin out of bitmap bounds (0601000D) Source window origin out of bitmap bounds (0601000E) Destination window origin out of bitmap bounds (0601000F) Invalid plane number (06010010) Cannot deallocate this bitmap (06010011) Coordinate value out of bounds (06010012) Invalid color map (06010013) Invalid raster operation value (06010014) Bitmap is read-only (06010015) Internal error (06010016) Font table is full (06010017) Bad font file (06010018) Invalid font id (06010019) Window is obscured (0601001A) Display is not in direct mode (0601001B) No polygon is being defined (0601001C) Keyboard has not been acquired (0601001D) Display has not been acquired (0601001E) Illegal pixel value range (0601001F) Operation illegal when in imaging format (06010020) Bad value for imaging format (06010021) Must release display for this operation (06010022) Different screen modes for input cannot be mixed (06010023) No input events are enabled (06010024) Duplicate points are illegal (06010025) Array must be in ascending order (06010026) character is not in font (06010027) Illegal bitmap for a fill pattern (06010028) fill pattern scale must be one (06010029) Incorrect alignment (0601002A) Illegal text path (0601002B) Unable to rotate this font (0601002C) Font is read only (0601002D) Illegal length for styled line pattern (0601002E) Illegal for pixel bitmap (0601002F) Input enabled in too many windows (06010030) Illegal software version number in pad (06010031) Bitmap descriptor is not for a bitmap file (06010032) No color map has been defined for this file (06010033) Illegal call for current decomp technique (06010034) Cannot change decomp technique while in polygon (06010035) Specific winding number must be nonzero (06010036) Arc path coordinates have overflowed 16bits (06010037) Invalid virtural device id (06010038) Decomp technique not valid (06010039) Rop mode set is null, set via raster_op_prim_set (0601003A) Multiple rop modes in set, and rops not equal (0601003B) Input events not available in gpr_$no_display mode (0601003C) Style call is not active (0601003D) No more fast buffers for double buffering (0601003E) Input buffer overflowed (0601003F) Conflicting input event types (06010040) Invalid input event type (06010041) Specified option is not valid (06010042) Unimplemented GPR traitop (06010043) Color map ID is not valid (06010044) Resources required for this operation are unavailable (06010045) Operation not supported in FRAME mode (06010046) Requested resource type was not valid (06010047) Source and target of BLT must be on same device graphics / DM support: (06020001) Invalid bitmap address (06020002) Invalid bitmap length graphics / core graphics: (06030001) 3D inquiry function needed (06030002) Count parameter or array size is less than 1 (06030003) Array size is less than 3 (06030004) There is no selected view surface (06030005) Inconsistant viewing specification (06030006) A segment is currently open (06030007) There is no open segment (06030008) Color attribute not supported by view surface (06030009) Intensity attribute not supported by view surface (0603000A) Requested linestyle attribute not supported (0603000B) Requested linewidth attribute not supported (0603000C) Requested pen attribute not supported (0603000D) Requested font not supported (0603000E) String contains undefined characters (0603000F) Charplane and charup vectors are parallel (06030010) Requested marker symbol not supported (06030011) There already is an open segment (06030012) The requested retained segment name already exists (06030013) Current image transformation is of wrong type (06030014) There is no open retained segment (06030015) There is no retained segment matching given name (06030016) There already exists a segment with given name (06030017) There is no open temporary segment (06030018) One or more of the attribute values is invalid (06030019) All charplane normal components are zero (0603001A) All charup components are zero (0603001B) Image transformation type is invalid (0603001C) Image transformation higher type than requested (0603001D) Segment image xform type not compatible with inq (0603001E) Segment image xform type higher than inquiry (0603001F) Maximum less than minimun value (2D) (06030020) View up vector components both equal zero (06030021) Program has already set NDC space (06030022) NDC default space has already been established (06030023) A parameter is not in NDC system : 0->1 (06030024) Neither width nor height is equal to 1 (06030025) Width or height is equal to zero (06030026) Viewport corner outside of NDC space (06030027) A 3D viewing function was needed, not 2D (06030028) Specified NDC position is outside viewport (06030029) The world coordinate xform is not invertible (0603002A) World coordinate position outside clipping window (0603002B) All 3 components of view plane normal are zero (0603002C) Front distance is greater than back distance (0603002D) Parallel projection and direction components = 0 (0603002E) Window maximum less than window minimum (0603002F) All 3 viewup normal vector components are = 0 (06030030) Maximum less than minimun value (3D) (06030031) Projection of world coord. position outside window (06030032) World coordinate position in front of clip plane (06030033) World coordinate position in back of clip plane (06030034) World coord. position behind center of projection (06030035) Coordinate system type has already been set (06030036) Too late - viewing established or segment exists (06030037) View plane normal and viewup vector parallel (06030038) Front plane not between cop and back plane (06030039) Direction of projection aparallel to view plane (0603003A) Center of projection on or behind view plane (0603003B) Front and back clipping planes coincident (0603003C) Device already initialized (0603003D) Device class or device number is invalid (0603003E) Device class is invalid (0603003F) Array contains invalid device number (06030040) Device is not initialized (06030041) Device is already enabled (06030042) Member of group not initialized (06030043) Device is not enabled (06030044) Locator device not enabled (06030045) Valuator device not enabled (06030046) Time parameter is less than zero (06030047) Event device not initialized (06030048) Invalid event device class (06030049) Association already exists (0603004A) Event class is invalid (0603004B) One or both devices not initialized (0603004C) Association does not exist (0603004D) Event report not from pick device (0603004E) Event report not from keyboard device (0603004F) Event report not from stroke device (06030050) Needed 3D input function (06030051) Locator not enabled or associated (06030052) Valuator not enabled or associated (06030053) No button devices are initialized (06030054) Specified pick device not initialized (06030055) Specified keyboard device not initialized (06030056) Specified stroke device not initialized (06030057) Specified locator device not initialized (06030058) Specified valuator device not initialized (06030059) Echo type is invalid for specified class (0603005A) Specified device does not accept echo segment (0603005B) Image xform of segment incompatible with echo type (0603005C) Echo position outside of NDC space (0603005D) Pick aperature is less than or equal to zero (0603005E) Buffer size out of bounds (0603005F) Cursor start position out of bounds (06030060) Initial string contains undefined characters (06030061) Specified button device is not initialized (06030062) Distance or time less than or equal to zero (06030063) Specified locator position outside of NDC space (06030064) Maximum less than minimun (3D) (06030065) Locport corner outside of NDC space (06030066) Low value is greater than high value (06030067) Initial value not within defined range (06030068) Associated size less than or equal to zero (06030069) Duplication size less than or equal to zero (0603006A) Core has already been initialized (0603006B) Specified output level cannot be supported (0603006C) Specified input level cannot be supported (0603006D) Specified dimension cannot be supported (0603006E) View surface is already initialized (0603006F) No output device associated with view surface (06030070) No other view surface can be initialized (06030071) View surface is not initialized (06030072) View surface is already selected (06030073) View surface cannot be selected (06030074) View surface has not been selected (06030075) Immediate visibility state is invalid (06030076) Currently in batch of updates (06030077) Not in batch of updates (06030078) Element of segment array does not exist (06030079) Invalid visibility array element (0603007A) Core has not been initialized (0603007B) Function at a higher level than current suppory (0603007C) Invalid error log invocation (0603007D) Function is not supported (0603007E) Parameter count is incorrect (0603007F) One or more parameters invalid (06030080) Vertex array is too small (06030081) Intensity value is invalid (06030082) Color value is invalid (06030083) Specified table range is invalid (06030084) Low or high table index is invalid (06030085) Low table index is greater than high (06030086) Too few values to fill specified range (06030087) Invalid intensity array element (06030088) Invalid color array element (06030089) Origin outside NDC space (0603008A) Array size invalid (0603008B) Array row invalid (0603008C) Array column invalid (0603008D) Invalid parameter value (0603008E) View surface is initialized to intensity (0603008F) Invalid index value (06030090) Shading vertex mismatch (06030091) Vertices not coplanar (06030092) Less than three vertices received (06030093) Index range is too large (06030094) Table is too small (06030095) View surface is of type color (06030096) View surface is of type intensity (06030097) There is no hidden surface support (06030098) The specified mode is invalid (06030099) View surface is initialized (0603009A) Invalid view surface type parameter (0603009B) Input currently not supported in frame mode (0603009C) There is no room to add to the display list (0603009D) There is no room for new segments (0603009E) Polygon was too complex to decompose (0603009F) Time out in input routine graphics / map file manager: (06040001) Bits/inch parameter is negative (06040002) X dimension is not positive (06040003) Y dimension is not positive (06040004) Words/line parameter is too small (06040005) Position parameter is illegal graphics / 2D metafile manager: (06050001) Not initialized (06050002) Already initialized (06050003) Data coerce needed (06050004) No current file (06050005) Too many files (06050006) File name not found (06050007) File id invalid (06050008) No current segment (06050009) Another segment is open (0605000A) Segment name already used (0605000B) Too many segments (0605000C) Segment name not found (0605000D) Segment id invalid (0605000E) Cant delete instanced segment (0605000F) Segment locked by pick (06050010) Invalid polyline options (06050011) Negative circle radius (06050012) Circle cant be filled (06050013) Illegal self instance (06050014) Aclass id invalid (06050015) Ablock id invalid (06050016) Too many ablocks (06050017) Ablock not created (06050018) Attribute value invalid (06050019) No font family included (0605001A) Too many font families (0605001B) Font family name not found (0605001C) Font family id invalid (0605001D) Cant delete font family in use (0605001E) No gm bitmap exists (0605001F) Viewport id invalid (06050020) Viewport bounds invalid (06050021) Viewport doesnt exist (06050022) No current viewport (06050023) Too many viewports (06050024) Nothing displayed in viewport (06050025) Coordinate conversion overflow (06050026) Command type doesnt match (06050027) No current command (06050028) No pick matches found (06050029) Pick list not initialized (0605002A) Pick list empty (0605002B) Pick list too long (0605002C) Input event type invalid (0605002D) Wrong display mode (0605002E) Illegal value (0605002F) Bounds invalid (06050030) Name length invalid (06050031) Font family name already used (06050032) Obsolete procedure (06050033) Command type invalid (06050034) Concurrency mode invalid (06050035) Access mode invalid (06050036) Edit option invalid (06050037) Index value invalid (06050038) Font type invalid (06050039) Too many environment file definitions (0605003A) Negative arc radius (0605003B) Flat arc graphics / GSR: (06060001) Operation invalid (06060002) Zero vector invalid (06060003) Vectors are dependent (06060004) Invalid hither distance (06060005) Invalid clip planes (06060006) Invalid window (06060007) Matrix is singular (06060008) Ran out of space (06060009) Invalid file id (0606000A) Too many files (0606000B) Viewport outside ldc range (0606000C) No intersection (0606000D) Point outside device limits (0606000E) Illegal instruction (0606000F) Unimplemented instruction (06060010) Pick interrupt (06060011) No further picks (06060012) Invalid context range (06060013) Illegal single step count (06060014) Illegal instance depth (06060015) Display context not found (06060016) Display break on instance (06060017) Display break on return (06060018) Illegal break point found (06060019) Partial refresh sync error (0606001A) Illegal display mode error (0606001B) GPU device not present (0606001C) Invalid virtual device id (0606001D) Unsupported opcode for this machine (0606001E) Unsupported execution mode for this machine (0606001F) Block size is too small (06060020) Unsupported device (06060021) Invalid eye distance (06060022) Display device error (06060023) Illegal operands (06060024) Device unavailable (06060025) Previous error in display device (06060026) Insufficient zbuffer memory (06060027) Font file already loaded (06060028) Font table full (06060029) Bad or improperly formatted font file (0606002A) Invalid font id (0606002B) Font still referenced (0606002C) Unable to rotate this font graphics / metafile manager: (06070001) Operation invalid (06070002) Unable to remap file (06070003) No such structure (06070004) Invalid in read access mode (06070005) Illegal argument (06070006) Already initialized (06070007) Invalid plane count (06070008) Not initialized (06070009) Too many files (0607000A) No such file (0607000B) Invalid file id (0607000C) No current file (0607000D) No current structure (0607000E) Too many points (0607000F) Too few points (06070010) unused (16) (06070011) Viewport does not exist (06070012) Illegal value (06070013) Viewport bounds invalid (06070014) Attribute value invalid (06070015) No gmr bitmap exists (06070016) Too many viewports (06070017) Unable to clear viewport (06070018) Viewport id invalid (06070019) No current viewport (0607001A) Not implemented (0607001B) Unable to allocate page (0607001C) Unable to initialize file (0607001D) Structure not allocated (0607001E) Render record not allocated (0607001F) Edit record not allocated (06070020) Structure body not allocated (06070021) Unable to initialize structure tables (06070022) Viewport borders too large (06070023) Viewport outside ldc limits (06070024) Unable to map file (06070025) Viewport border outside ldc (06070026) Instance not allocated (06070027) Tag not allocated (06070028) Unimplemented mode (06070029) Structure name already used (0607002A) Too many structures (0607002B) Unable to grow file on open (0607002C) Unable to allocate additional space (0607002D) Structure size too large to grow (0607002E) Unable to allocate element space (0607002F) No current element (06070030) Invalid for display mode (06070031) Input event type invalid (06070032) Unable to grow file at edit (06070033) Inq element does not match (06070034) Color id out of range (06070035) Inq array size too small (06070036) Structure already open (06070037) Aclass id invalid (06070038) Ablock id invalid (06070039) Too many ablocks (0607003A) Text invalid string length (0607003B) Text up vector too short (0607003C) LDC limits invalid (0607003D) File initialization error (0607003E) No primary structure (0607003F) Too many instances of structure (06070040) Ablock not created (06070041) Structure header allocation error (06070042) Instance record allocation error (06070043) Tag record allocation error (06070044) Device limits invalid (06070045) Returned block too short (06070046) Structure move body error (06070047) Structure release version error (06070048) Instance structure id mismatch error (06070049) Structure has no bounds (0607004A) Unknown element (0607004B) Tag not located (0607004C) Intensity out of range (0607004D) Element index out of range (0607004E) Structure delete error (0607004F) Add instance link error (06070050) Drop instance link check error (06070051) Drop instance backward link error (06070052) Drop instance forward link error (06070053) Release instance id error (06070054) Structure is instanced (06070055) Ablock in use (06070056) Color model inconsistent (06070057) Color range invalid (06070058) Valid range is 0 to 1 (06070059) Unable to copy between files (0607005A) File version mismatch (0607005B) Odd number of points (0607005C) Viewport state version mismatch (0607005D) Structure is still open (0607005E) Recursive instance (0607005F) Invalid view plane normal (06070060) Invalid up vector (06070061) Invalid hither distance (06070062) Clip planes reversed (06070063) Information unavailable (06070064) Invalid clip zmin (06070065) Invalid border width (06070066) Locator outside device limits (06070067) Locator outside viewport (06070068) Invalid normal vector (06070069) Matrix is singular (0607006A) Zero vector invalid (0607006B) Loss of precision (0607006C) Replace element zero index (0607006D) Point outside viewport (0607006E) Invalid window (0607006F) Pick index out of range (06070070) Element index not found (06070071) Instance index lookup failure (06070072) No elements in structure (06070073) Highlight lookup error (06070074) Bounding box highlight only (06070075) Highlight block undefined (06070076) No highlight defined (06070077) Using highlight default ablock (06070078) Pick list empty (06070079) Pick error (0607007A) Path depth out of range (0607007B) Highlight out of range (0607007C) Instance echo path viewport mismatch (0607007D) Illegal instance path length (0607007E) Illegal pick aperture size (0607007F) Non instance found on path (06070080) Dynamic mode incompatible element type (06070081) Dynamic mode path viewport mismatch (06070082) Dynamic mode already set (06070083) Dynamic mode not set (06070084) Dynamic mode null element (06070085) Dynamic mode edit lock (06070086) Bitmap attribute block error (06070087) Mark type invalid (06070088) Invalid line type (06070089) Invalid name set (0607008A) Invalid attribute type value (0607008B) Invalid attribute source value (0607008C) Echoing non primitive (0607008D) Graphics Accelerator not present (0607008E) Normal in plane of polygon (0607008F) Invalid shading mode (06070090) Invalid hidden surface mode (06070091) Invalid fill style (06070092) Invalid bsp id (06070093) Bsp file does not exist (06070094) Light index out of range (06070095) Zbuffer not supported on device (06070096) Illegal in dynamic mode (06070097) Dynamic mode buffer overflow (06070098) Unknown tag type (06070099) Polygon decomposition region count exceeded (0607009A) Polygon decomposition point count exceeded (0607009B) Replaced element not an instance (0607009C) Ptext not allocated (0607009D) No structure assigned to viewport (0607009E) No bsp tree assigned to viewport (0607009F) Non-trivial 4th column in matrix (060700A0) Light source not enabled (060700A1) Wrong light source type (060700A2) Wrong structure type (060700A3) Points are collinear (060700A4) Storage undefined (060700A5) Zbuffer not enabled (060700A6) Insufficient zbuffer memory (060700A7) Internal error with concave polygon (060700A8) Relocation failure (060700A9) Storage mismatch (060700AA) Compactor failure (060700AB) Invalid propagation option (060700AC) 4x4 can't convert to 4x3 (060700AD) Initial structure size too small (060700AE) Initial structure size too large (060700AF) Growth rate is too small (060700B0) Growth rate is too large (060700B1) Growth constant is too small (060700B2) Growth constant is too large (060700B3) NOP size is too small (060700B4) NOP size is too large (060700B5) NOP multiple is too small (060700B6) NOP multiple is too large (060700B7) Invalid font i.d. (060700B8) Font i.d. in use (060700B9) Obsolete procedure (060700BA) unimplemented procedure (060700BB) invalid font file (060700BC) max fonts in use (060700BD) viewport not visible (060700BE) viewport is blocked (060700BF) illegal buffer option (060700C0) buffer limit exceeded (060700C1) buffer id outside of range (060700C2) too many knots (060700C3) too few knots (060700C4) no normal specified (060700C5) bad crv order (060700C6) bad crv min max (060700C7) more aux data present (060700C8) inconsistent knot values graphics / color table manager: (06080001) Requested pixel values not available (06080002) No RWS available (06080003) Requested pixel value not allocated (06080004) Current color map is not installed (06080005) Color map ID is not valid (06080006) Invalid display unit number graphics / IDM/RM resource manager: (06090001) not an resource ID (06090002) resource no longer exists (06090003) wrong resource type (06090004) non-existent resource (06090005) null resource ID (06090006) resource in use, only marked for deletion (06090007) ?? unused resource manager error code 7 ?? (06090008) ?? unused resource manager error code 8 ?? (06090009) bad resource pointer (0609000A) null resource pointer (0609000B) resources index/pointer mismatch (0609000C) attempt to link an already linked resource (0609000D) UETLIB version number mismatch (0609000E) record length mismatch (0609000F) no more RW storage available graphics / rectangle manager: (060A0001) not a rectangle ID (060A0002) rectangle no longer exists (060A0003) not a RM ID (060A0004) non-existent rectangle (060A0005) NULL rectangle ID (060A0006) rectangle in use, only marked for deletion (060A0009) not a group ID (060A000A) group no longer exists (060A000B) not a RM group ID (060A000C) non-existent group (060A000D) NULL group ID (060A000E) group in use, only marked for deletion (060A0011) rectangle is a root (060A0012) rectangles have different roots (060A0013) invalid rectangle limits (060A0014) WARNING (x,y) not in any sub-rectangle (060A0015) (x,y) not in parent or any rectangle (060A0016) no such rectangle property key (060A0017) null rectangle property key (060A0018) caller supplied array too short (060A0019) rectangle not acquired (060A001A) rectangle not in use (060A001B) rectangle already in group (060A001C) rectangle not in group (060A001D) quit-fault while waiting to acquire (060A001E) operation is inconsistent with attributes (060A001F) rectangles have different parents (060A0020) rectangle operation was deferred (060A0021) refresh procedure not in global memory graphics / input demultiplexor: (060B0001) not an event processor ID (060B0002) event processor no longer exists (060B0003) wrong IDM resource type (060B0004) non-existent event processor (060B0005) null event processor ID (060B0006) event processor in use, only marked for deletion (060B0009) not a focal point ID (060B000A) focal point no longer exists (060B000B) wrong IDM resource type (060B000C) non-existent focal point (060B000D) null focal point ID (060B000E) event processor in use, only marked for deletion (060B0011) not a queue ID (060B0012) queue no longer exists (060B0013) wrong IDM resource type (060B0014) non-existent queue (060B0015) null queue ID (060B0016) queue in use, only marked for deletion (060B0019) not a binding set ID (060B001A) binding set no longer exists (060B001B) wrong IDM resource type (060B001C) non-existent binding set (060B001D) null binding set ID (060B001E) binnding set in use, only marked for deletion (060B0021) bad IDM key (060B0022) event processor blocked (060B0023) focal point and rectangle not associated (060B0024) buffer full (060B0025) focal point not active (060B0026) binding set array too short (060B0027) no such logical device (060B0028) bad logical device index (060B0029) wrong logical device type (060B002A) focal point is not a focus (060B002B) event processor not in use (060B002C) focal point not in use (060B002D) queue not in use (060B002E) binding not in use (060B002F) event bindings are not in global memory (060B0030) device already borrowed by owner graphics / BitMapFile manager: (060C0001) Package not initialized (060C0002) Invalid x size value (060C0003) Invalid y size value (060C0004) Invalid file identifier (060C0005) Too many files open (060C0006) Invalid file length specifier (060C0007) Invalid scanline length (060C0008) Out of bounds access (060C0009) Header size error (060C000A) Procedure is obsolete (060C000B) Package already initialized (060C000C) No zbuffer data area allocated (060C000D) Wrong size zbuffer (060C000E) Improper window size (060C000F) Invalid user data length (060C0010) Invalid offset value (060C0011) Wrong file format (060C0012) No user data allocated (060C0013) File is compressed (060C0014) File is not compressed (060C0015) File format mismatched (060C0016) Color map is not allocated (060C0017) Invalid color map index (060C0018) Too many color map entries (060C0019) Illegal color map entries graphics / raytracer shell: (060D0001) Operation invalid (060D0002) Package not initialized (060D0003) Matrix is singular (060D0004) Zero vector invalid (060D0005) Vectors are dependent (060D0006) Invalid window parameters (060D0007) Invalid view distance value (060D0008) Bitmap already exists (060D0009) Bitmap does not exist (060D000A) Invalid pathname (060D000B) Invalid rectangle parameters (060D000C) Invalid resolution parameters (060D000D) Invalid up-vector value (060D000E) Invalid normal-vector value (060D000F) Invalid bitmap size (060D0010) No object open (060D0011) Object not an aggregate (060D0012) Too many open objects (060D0013) No such object (060D0014) No such attribute (060D0015) Attribute stack overflow (060D0016) No active attribute (060D0017) Save-file overflow (060D0018) Invalid opcode (060D0019) Too many lights graphics / raytracer kernel: (060E0001) Operation invalid graphics / geometry trait: (060F0001) Unimplemented trait function (060F0002) Scratchpad memory overflow (060F0003) Degenerate trimming loop (060F0004) Memory management error item not found (060F0005) Trimming loop outside support of knots graphics / display: (0610FFFF) Node does not have a display (06100001) Stream is not associated with a display graphics / wall-punch handler: (0611FFFF) Buffer too small to hold full set of data (06110001) Internal error (06110002) Invalid impact display unit number (06110003) Invalid impact wall selection (06110004) Invalid impact coordinates (06110005) Invalid exit display unit number (06110006) Invalid exit wall selection (06110007) Invalid exit coordinates (06110008) New entry overlaps existing entry wall-region (06110009) Nothing matches the specified coordinates (0611000A) Too many entries already in table graphics / run-time loader: (06120001) operation invalid (06120002) too many paths (06120003) name not found (06120004) global not found (06120005) object load failed RGYC / Client: (07010001) Entry not found (07010002) Name already exists (07010003) Name is too long (07010004) Incompatible program and file versions (07010005) No more memory space available (07010006) Registry is read-only (07010007) Invalid file, internal error (07010008) Registry salvage only partially complete (07010009) No valid registry found at any registry site (0701000A) Name must begin with a lowercase letter (0701000B) Cannot delete reserved name (0701000C) Unable to access registry at any registry site (0701000D) Name contains invalid characters (0701000E) Entry already exists (0701000F) Operation not yet implemented (07010010) Invalid person identifier (07010011) Invalid group identifier (07010012) Invalid organization identifier (07010013) Invalid node identifier (07010014) Invalid p.g.o identifier (07010015) Operation invalid in specified domain (07010016) New password is too short (07010017) New password is too long (07010018) New password cannot be all spaces (07010019) New password cannot be all alphanumeric (0701001A) Password incorrect (0701001B) Invalid owner RGYC / Login: (07020001) Shutting down (07020002) Exiting (07020003) insufficient address space (07020004) password does not check (07020005) account is invalid or has expired (07020006) logins are disabled RGYC / Server: (07030001) Operation not yet implemented (07030002) Unix id changed or incorrect (07030003) Object is an alias (07030004) Registry server unavailable (07030005) Person is not a member of specified group (07030006) Person is not a member of specified org (07030007) Person is not a member of specified group and org (07030008) Incomplete account name (07030009) Not authorized to perform operation D3M data management / d3mlib: (08010001) database not open (08010002) dbk for wrong area (08010003) database already open (08010004) transaction lock request timed out (08010005) duplicates error (08010006) current unknown (08010007) end of set or area (08010008) unknown name; not in schema (08010009) database open read only or update transaction not in effect (0801000A) wrong password (0801000B) no disk space (0801000C) dbk not available/no good (0801000D) unused (0801000E) no current of this record type (0801000F) set has no optional members (08010010) record is already member (08010011) violation of concatenated set integrity (08010012) unused (08010013) unused (08010014) current of rec wrong type (08010015) current of rununit of wrong type (08010016) record not member in set (08010017) record not in area (08010018) unused (08010019) unused (0801001A) no record satisfies record selection (0801001B) unused (0801001C) area already open (0801001D) area not open (0801001E) delete set not empty (0801001F) internal stack overflow (08010020) invalid literal argument (08010021) invalid argument (08010022) unused (08010023) operation cannot be performed within transaction (08010024) unused (08010025) unused (08010026) unused (08010027) fatal D3MLIB error (08010028) findv requires sorted set (08010029) findc requires calced record (0801002A) record not indexed (0801002B) unused (0801002C) improper set mode (0801002D) set, record, etc. not in subschema (0801002E) unused (0801002F) unused (08010030) unused (08010031) unused (08010032) unused (08010033) deleted rec referenced (08010034) key relation mismatch (08010035) HLDML call error (08010036) HLDML syntax error (08010037) HLDML semantic error (08010038) HLDML execution error from D3MLIB (08010039) unexpected HLDML execution error (0801003A) HLDML internal error (0801003B) unused (0801003C) unused (0801003D) close error (0801003E) name not found (0801003F) file not found (08010040) required resources not available (08010041) end of file (08010042) wrong object type (08010043) unable to open (08010044) unused (08010045) database must be recovered (use RCVRDB) (08010046) loc mode select required in all sets (08010047) too many sets in path (08010048) multischema inconsistency (08010049) distributed DML operation not supported (0801004A) dynamic store error (0801004B) violation of distributed set integrity (0801004C) unused (0801004D) unused (0801004E) unused (0801004F) unused (08010050) unused (08010051) transaction call err (08010052) active transaction required (08010053) unused (08010054) unused (08010055) unused (08010056) unused (08010057) D3MLIB error (08010058) unused (08010059) schema/subschema confusion (0801005A) recompile schema (0801005B) read error on (sub)schema file (0801005C) (sub)schema file open err (0801005D) database write error (0801005E) database read error (0801005F) concurrency violation (08010060) device unavailable (08010061) unused (08010062) must preallocate file (use INDB) (08010063) bad bucket address UNIX / signal: (09010001) hangup fault (09010002) interrupt fault (09010003) quit fault (09010004) illegal instruction fault (09010005) trace trap fault (09010006) IOT instruction fault (09010007) EMT instruction fault (09010008) floating point exception fault (09010009) process kill fault (0901000A) bus error fault (0901000B) segmentation violation fault (0901000C) bad argument to system call fault (0901000D) broken pipe fault (0901000E) alarm clock fault (0901000F) software termination fault (09010010) user-defined fault (1) (09010011) user-defined fault (2) (09010012) child death fault (09010013) Apollo-specific fault (09010014) process stop fault (09010015) stop signal generated from keyboard fault (09010016) continue after stop fault (09010017) child status has changed fault (09010018) backgrnd read attempt from control terminal fault (09010019) backgrnd write attempt from control terminal fault (0901001A) i/o is possible on a descriptor fault (0901001B) cpu time limit exceeded fault (0901001C) file size limit exceeded fault (0901001D) virtual time alarm fault (0901001E) profiling timer alarm fault (0901001F) urgent condition present on socket fault (09010020) window changed size fault UNIX / child unconditional suspend signal: UNIX / child continue signal: UNIX / child death signal: UNIX / ptrace signal: UNIX / child keyboard suspend signal: UNIX / child background read suspend signal: UNIX / child background write suspend signal: UNIX / sys5 ipc: (09090001) not holding db lock (09090002) undefined (09090003) already holding db lock (09090004) bad free of msq space (09090005) bad lock request (09090006) no access (09090007) ipc object not found (09090008) no space for descr (09090009) ipc object already exists UNIX / longjmp: (090A0001) internal longjmp status (090A0002) longjmp status UNIX / file utilities: (090B0001) incorrect version number (090B0002) directory created (090B0003) soft link created UNIX / errno status: (090C0001) EPERM Not owner (090C0002) ENOENT No such file or directory (090C0003) ESRCH No such process (090C0004) EINTR Interrupted system call (090C0005) EIO I/O error (090C0006) ENXIO No such device or address (090C0007) E2BIG Arg list too long (090C0008) ENOEXEC Exec format error (090C0009) EBADF Bad file number (090C000A) ECHILD No childen (090C000B) EAGAIN No more processes (090C000C) ENOMEM Not enough space (090C000D) EACCES Permission denied (090C000E) EFAULT Bad address (090C000F) ENOTBLK Block device required (090C0010) EBUSY Device or resource busy (090C0011) EEXIST File exists (090C0012) EXDEV Cross-device link (090C0013) ENODEV No such device (090C0014) ENOTDIR Not a directory (090C0015) EISDIR Is a directory (090C0016) EINVAL Invalid argument (090C0017) ENFILE File table overflow (090C0018) EMFILE Too many open files (090C0019) ENOTTY Not a character device or Not a typewriter (090C001A) ETXTBSY Text file busy (090C001B) EFBIG File too large (090C001C) ENOSPC No space left on device (090C001D) ESPIPE Illegal seek (090C001E) EROFS Read-only file system (090C001F) EMLINK Too many links (090C0020) EPIPE Broken pipe (090C0021) EDOM Math argument (090C0022) ERANGE Result too large (090C0023) EWOULDBLOCK Operation would block (090C0024) EINPROGRESS Operation now in progress (090C0025) EALREADY Operation already in progress (090C0026) ENOTSOCK Socket operation on non-socket (090C0027) EDESTADDRREQ Destination address required (090C0028) EMSGSIZE Message too long (090C0029) EPROTOTYPE Protocol wrong type for socket (090C002A) ENOPROTOOPT Option not supported by protocol (090C002B) EPROTONOSUPPORT Protocol not supported (090C002C) ESOCKTNOSUPPORT Socket type not supported (090C002D) EOPNOTSUPP Operation not supported on socket (090C002E) EPFNOSUPPORT Protocol family not supported (090C002F) EAFNOSUPPORT Address family not supported by protocol family (090C0030) EADDRINUSE Address already in use (090C0031) EADDRNOTAVAIL Can't assign requested address (090C0032) ENETDOWN Network is down (090C0033) ENETUNREACH Network is unreachable (090C0034) ENETRESET Network dropped connection on reset (090C0035) ECONNABORTED Software caused connection abort (090C0036) ECONNRESET Connection reset by peer (090C0037) ENOBUFS No buffer space available (090C0038) EISCONN Socket is already connected (090C0039) ENOTCONN Socket is not connected (090C003A) ESHUTDOWN Can't send after socket shutdown (090C003B) ETOOMANYREFS Too many references: can't splice (090C003C) ETIMEDOUT Connection timed out (090C003D) ECONNREFUSED Connection refused (090C003E) ELOOP Too many levels of symbolic links (090C003F) ENAMETOOLONG File name too long (090C0040) ENOTEMPTY Directory not empty (090C0041) ENOMSG No message of desired type (090C0042) EIDRM Identifier removed (090C0043) unused (090C0044) unused (090C0045) unused (090C0046) unused (090C0047) unused (090C0048) unused (090C0049) unused (090C004A) unused (090C004B) EHOSTDOWN Host is down (090C004C) EHOSTUNREACH Host is unreachable (090C004D) unused (090C004E) unused (090C004F) unused (090C0050) ENOLCK No lock (090C0051) ENOSTR Not a stream (090C0052) ENODATA No data (090C0053) ETIME Stream ioctl time-out (090C0054) ENOSR No stream resources (090C0055) unused (090C0056) unused (090C0057) unused (090C0058) unused (090C0059) unused (090C005A) unused (090C005B) unused (090C005C) EPROTO Protocol error (090C005D) unused (090C005E) unused (090C005F) unused (090C0060) EBADMSG Bad message (090C0061) unused (090C0062) unused (090C0063) unused (090C0064) error in format (090C0065) illegal unit number (090C0066) formatted i/o not allowed (090C0067) unformatted i/o not allowed (090C0068) direct i/o not allowed (090C0069) sequential i/o not allowed (090C006A) cannot backspace file (090C006B) off beginning of record (090C006C) cannot stat file (090C006D) no * after repeat count (090C006E) off end of record (090C006F) truncation failed (090C0070) incomprehensible list input (090C0071) out of free space (090C0072) unit not connected (090C0073) invalid data for integer format term (090C0074) invalid data for logical format term (090C0075) new file exists (090C0076) cannot find old file (090C0077) opening too many files or unknown system error (090C0078) requires seek ability (090C0079) illegal argument (090C007A) negative repeat count (090C007B) illegal operation for unit (090C007C) invalid data for d,e,f, or g format term. (090C007D) reserved for fortran (090C007E) reserved for fortran (090C007F) reserved for fortran (090C0080) reserved for fortran (090C0081) reserved for fortran (090C0082) ELIBACC can't access a needed shared lib. (090C0083) ELIBBAD accessing a corrupted shared lib. (090C0084) ELIBSCN .lib section in a.out corrupted (090C0085) ELIBMAX attempting to link in too many shared libs (090C0086) ELIBEXEC attempting to exec a shared lib. (090C0087) ENOSYS function not supported (090C0088) ESTALE stale NFS file handle UNIX / file I/O: (090DFFFF) unknown type UNIX / device number: (090E0001) entry not found (090E0002) table full (090E0003) entry in use store and forward manager / lib: (0A010001) unrecognized option (0A010002) invalid site name (0A010003) invalid queue name (0A010004) missing site flag in routing file (0A010005) missing site name in routine file (0A010006) unknown keyword in routing file (0A010007) missing queue name or gateway info in routing file (0A010008) site name not found in routing file (0A010009) invalid message length (0A01000A) requested route unavailable (0A01000B) invalid queue size (0A01000C) invalid queue delete request (0A01000D) queue is empty (0A01000E) queue is full (0A01000F) bad route syntax (0A010010) no further hops in route (0A010011) route entry too long (0A010012) invalid queue release request (0A010013) queue entry already locked (0A010014) bad queue lock request (msg_id mismatch) (0A010015) server not registered (0A010016) a server is already registered (0A010017) message received (0A010018) this hop is last in route (0A010019) route length less than or equal to 0 (0A01001A) queue name length less than 0 (0A01001B) hop will not fit in route field (0A01001C) routing file unavailable (0A010020) queue already exists (0A010021) bad pathname for queue (0A010022) queue not found (0A010023) bad queue directory (0A010024) no rights to queue (0A010025) insufficient rights to queue (0A010026) message added to local queue (0A010028) queue control file already exists (0A010029) bad pathname for queue control file (0A01002A) queue control file not found (0A01002B) bad queue control file directory (0A01002C) no rights to queue control file (0A01002D) insufficient rights to queue control file (0A010030) message already exists (0A010031) bad pathname for message (0A010032) message not found (0A010033) bad message directory (0A010034) no rights to message (0A010035) insufficient rights to message (0A010038) object already exists (0A010039) bad pathname for object (0A01003A) object not found (0A01003B) bad object directory (0A01003C) no rights to object (0A01003D) insufficient rights to object store and forward manager / sf_helper: (0A020001) bad delay specification netman / netman: (0B010001) unknown service request type netman / boot: (0B020001) node not in diskless list (0B020002) requested file has wrong machine id (0B020003) unknown boot service request kind (0B020004) wrong type uid (0B020005) invalid page range in boot service request (0B020006) error encountered in netman.rc netman / dump: (0B030001) dump already in progress from another node (0B030002) dump not open (0B030003) page/close request received from wrong node (0B030004) dump too large for dump file (0B030005) unknown dump service request kind (0B030006) dump timed out waiting for next page X.25 / device driver: (0C010001) controller does not exist (0C010002) controller unit number out of range (0C010003) bad buffer pointer (0C010004) bad buffer length (0C010005) invalid device control operation argument (0C010006) invalid eventcount key (0C010007) bad command buffer length (0C010008) invalid download operation argument (0C010009) download address is out of range (0C01000A) download checksum failure (0C01000B) no data in device output mailbox (0C01000C) data from device truncated (0C01000D) device set invalid data length (0C01000E) device failed to respond (0C01000F) device does not operate properly (0C010010) invalid format for download file header X.25 / gateway server: (0C020001) invalid server request type (0C020002) invalid X.25 packet type (0C020003) permanent virtual circuit lcn is out of range (0C020004) permanent virtual circuit in use (0C020005) permanent virtual circuit lcn is not a permanent vc (0C020006) channel is not a switched virtual circuit (0C020007) virtual circuit already open on this channel (0C020008) virtual circuit is not open on this channel (0C020009) an offer is already pending on this channel (0C02000A) no more switched virtual circuits available (0C02000B) invalid IOCTL request (0C02000C) X.25 network link not up X.25 / library: (0C030001) invalid "/sys/x25/sysnames" file format (0C030002) X.25 system name not found in "/sys/x25/sysnames" file (0C030003) X.25 address not found in "/sys/x25/sysnames" file (0C030004) packet buffer too small (0C030005) invalid X.25 packet header (0C030006) invalid X.25 source address (0C030007) invalid X.25 source address length (0C030008) invalid X.25 destination address (0C030009) invalid X.25 destination address length (0C03000A) invalid X.25 call request facilities field (0C03000B) invalid X.25 call request facilities length (0C03000C) invalid X.25 call request user data length (0C03000D) X.25 call request cleared (0C03000E) X.25 protocol error (0C03000F) unexpected reply from gateway server (0C030010) buffer is too large (0C030011) invalid call request data format option (0C030012) no X.25 receive data (0C030013) no room for X.25 transmit data (0C030014) X.25 call request not valid now or has bad format (0C030015) packet operation timed out X.25 / emulate terminal: (0C040001) unknown X.3 parameter (0C040002) invalid value for X.3 parameter X.25 / file transfer: (0C050001) incorrect operation of protocol (0C050002) unexpected reply from file server (0C050003) file buffer to large for packet (0C050004) amount of data sent exceeds size of target file (0C050005) could not rename target file (0C050006) target file already exists (0C050007) end of file encountered (0C050008) bad file name (0C050009) bad command line transmitted to file server (0C05000A) wild card translation resulted in no names (0C05000B) all translated wild card names delivered (0C05000C) wild card name store full in file server (0C05000D) clear packet received from X.25 (0C05000E) unexpected reply from X.25 (0C05000F) packet to small to transmit command line (0C050010) blank or null command line (0C050011) error in command line translation (file server) (0C050012) disagreement on buffer sizes for file xfer (0C050013) check sum error on file xfer (0C050014) remote domain X.25 file server not running (0C050015) remote domain X.25 host not available (0C050016) connection cleared in idle state (0C050017) file transfer aborted (0C050018) protocol error - X.25 reset packet received (0C050019) protocol error - X.25 interrupt packet received (0C05001A) protocol error - X.25 diagnostic packet received (0C05001B) procotol error detected by server (0C05001C) CASEHM and other structured objects not supported (0C05001D) remote x25file_svr is an obsolete version (0C05001E) cpfx25 is an obsolete version (0C05001F) sr10 cpfx25 will not work with a remote sr9.7 x25file_svr (0C050020) sr9.7 cpfx25 will not work with a remote sr10 x25file_svr (0C050021) 900228 (0C050022) user denied access on remote x25file_svr (0C050023) users calling address denied access on remote x25file_svr TCP/IP / gateway server: (0D010001) status available (not an error) (0D010002) network not available (0D010003) too many connections (0D010004) no free network buffers (0D010005) bad net open mode (0D010006) bad local address, port, link, or protocol (0D010007) destination dead (0D010008) raw message send failed (0D010009) read or write on closed connection (0D01000A) destination refused (0D01000B) destination unreachable (0D01000C) destination not responding (timeout) (0D01000D) end of file (foreign peer closed) (0D01000E) invalid request (0D01000F) unknown error TCP/IP / library: (0D020001) unexpected reply from server (0D020002) no data available (0D020003) no room for data (0D020004) bad ec key (0D020005) TCP/IP server is not running (0D020006) cannot get space for handle (0D020007) control mailbox not found (0D020008) data mailbox not found (0D020009) no more connections possible (0D02000A) illegal TCP/IP handle (0D02000B) operation attempted on unopened connection DOMAIN Diagnostics / Sax: (0E010001) Test aborted DOMAIN Diagnostics / Grtest: (0E020001) Test aborted DOMAIN Diagnostics / Sax_report: (0E030001) Test aborted (0E030002) Not initialized (0E030003) Unknown request type DOMAIN Diagnostics / Vtape: (0E040001) Test aborted VT100 emulator / library: (0F010001) unrecognized option (0F010002) bad ec key (0F010003) end of file (0F010004) window is too small (0F010005) stream is not connected to a VT100 emulator (0F010006) no more resources available (0F010007) already initialized (0F010008) import failed (0F010009) no pty (0F01000A) no server socket manager / manager: (10010001) bad ec key (10010002) address family not supported (10010003) socket is not connected (10010004) no data available (10010005) end of file (10010006) object on this stream is not a socket (10010007) destination address required (10010008) message too large (10010009) protocol type is wrong for this socket (1001000A) protocol not supported (1001000B) socket type not supported (1001000C) operation not supported (1001000D) protocol familly not supported (1001000E) requested address already in use (1001000F) requested address not available (10010010) socket is already connected (10010011) message will not fit (10010012) insufficient resources to create socket (10010013) export/import buffer too small (10010014) cannot send after socket shutdown (10010015) no completed connections (10010016) invalid request (10010017) connection reset by peer (10010018) no readers on socket (10010019) connection refused by peer socket manager / address manipulation: (10020001) input buffer too large (10020002) output buffer too small (10020003) bad numeric format name (10020004) can't find host name (10020005) can't convert address to host name (10020006) can't get name for local host (10020007) can't create socket for internal use (10020008) can't get network interface configuration information (10020009) internal error (1002000A) address family invalid (1002000B) invalid name format pty manager / manager: (11010001) illegal operation (11010002) no data available (11010003) no active slaves (11010004) no active controllers (11010005) controller already has pty open (11010006) bad ec key (11010007) object on stream is not a pty (11010008) end of file (11010009) not enough room for data dialog / interaction manager: (1201FFFB) Warning: ENUM has no choices (1201FFFC) Warning: task is in error (1201FFFD) Warning: unable to load default font file (1201FFFE) Warning: unable to load font file (1201FFFF) Warning: verification key mismatch (12010001) Library not compatible with interface description (12010002) Dialog not initialized (12010003) Nested event wait (12010004) Invalid task identifier (12010005) Wrong task type for operation (12010006) Window refresh in progress (12010007) Value out of range (12010008) Invalid file type (12010009) Dialog already initialized (1201000A) Invalid interface (dpd) identifier (1201000B) No tasks are accessible by the user (1201000C) Number of choices exceeds internal limits (1201000D) Bad heap format or reuse of heap object based systems / trait manager: (13010001) too many trait declarations (13010002) no available rws storage (13010003) unsupported trait (13010004) pm level too high (13010005) mark/release broken (13010006) trait not supported for local objects (13010007) trait not supported for near remote objects (13010008) trait not supported for wicked far-away objects object based systems / type manager: (13020001) type not found (13020002) type manager for type not found (13020003) type already exists (13020004) type manager already exists (13020005) types file not found (13020006) type manager directory not found (13020007) types file has invalid format (13020008) volume for the object is not mounted (13020009) un-named trait (1302000A) trait name is already in use (1302000B) type does not have trait-specific managers (1302000C) types file needs reformatting to use split traits (1302000D) types file has later version (not reformatted) (1302000E) duplicate UID DOMAIN/RDMS / gdslib: Communications Gateway / CMP: (15010001) no controller attached (15010002) invalid unit number (15010003) bad buffer pointer (15010004) bad buffer length (15010005) invalid control operation attempted (15010006) bad event count key (15010007) bad command length (15010008) invalid download operation (15010009) invalid download address (1501000A) bad checksum (1501000B) no data currently available (1501000C) data truncated (1501000D) bad device data length (1501000E) controller timed out (1501000F) controller error (15010010) cmp already initialized (15010011) timed out (15010012) out of address space (15010013) event not for you (15010014) your application may not perform a reset (15010015) channel in use (15010016) process is not yours (15010017) invalid call (15010018) cmp not yet initialized (15010019) error deallocating space (1501001A) tried to re-download controller (with same file) (1501001B) tried to re-download controller (with different file) (1501001C) board process is dead. No sends allowed. Communications Gateway / comm_driver: (15020001) no controller attached (15020002) bad unit number (15020003) bad process number (15020004) bad buffer length (15020005) invalid control operation was attempted (15020006) invalid event count key (15020007) board has dumped memory (15020008) invalid download operation (15020009) bad download address (1502000A) bad checksum (1502000B) no data currently available (1502000C) error mapping multibus memory (1502000D) no iopb available (1502000E) controller timed out (1502000F) controller error (15020010) non-fatal process error (15020011) board process experienced a fatal error (15020012) controller experienced a fatal error Communications Gateway / Serial Controller: (15030001) controller is not installed (15030002) invalid device number (15030003) invalid logical unit number (15030004) invalid channel number (15030005) invalid device type -- NULL is not allowed (15030006) invalid device type -- type string is too long (15030007) invalid unit -- not initialized (15030008) channel is not open to any process (15030009) channel type is not as requested (1503000A) channel is in use (1503000B) channel is already open (1503000C) channel is already closed (1503000D) another process reserved access for too long (1503000E) incoming data checksum failure (1503000F) no resources available on this channel (15030010) no received data available on this channel (15030011) operation failed in an unspecified way (15030012) serial controller is not responding (15030013) download failed (15030014) download module is too large (limit is 64K bytes) (15030015) download resource was in use for too long a time (15030016) buffer is too long Communications Gateway / Channel Controller: (15040001) internal driver error (15040002) unimplemented operation (15040003) caller using incompatible interface (15040004) CHAT controller not installed (15040005) CHAT stopped responding after init (15040006) CHAT not yet initialized (15040007) took a quit fault while pended (15040008) invalid device number for CHAT (15040009) unit number out of range (1504000A) path number out of range (1504000B) download leafname invalid (1504000C) invalid type_length parameter (1504000D) statistics block too small (1504000E) user's buffer too big (1504000F) user's buffer too small (15040010) attempted I/O on unopened path (15040011) attempted I/O on someone else's path (15040012) tried to open a path you already have open (15040013) tried to close an already closed path (15040014) all user paths are allocated (15040015) driver out of resources (probably memory) (15040016) board out of resources (not memory) (15040017) board can't load because of lack of memory (15040018) caller issued an ioctl incorrectly (15040019) caller passed a bad ioctl arg buffer (1504001A) returned a bad ioctl arg buffer (1504001B) download failed for unknown reason (1504001C) S-record loader hit a premature EOF (1504001D) the download file is corrupt (1504001E) S-record checksum is bad (1504001F) read or write call in non-blocking mode would have blocked (15040020) CHAT Driver Library (chatlib) Not Found SNA / api3770: (16010001) bad handle (16010002) UIM channel closed (16010003) no gateway name server file (16010004) bad name server file length (16010005) name server file access error (16010006) UIM open error (16010007) UIM invoke error (16010008) UIM mbx not open (16010009) error opening UIM client channel (1601000A) channel eventcount error (1601000B) error closing UIM client channel (1601000C) no UIM response (1601000D) unknown read type (1601000E) error getting response from channel (1601000F) no room in UIM channel (16010010) request too big (16010011) error writing to UIM channel SNA / uim3770: (16020001) reserved (16020002) timed out waiting for gateway reply (16020003) gateway closed channel unexpectedly (16020004) request ignored in this context (16020005) request too long (16020006) ambiguous request (16020007) unknown request (16020008) invalid request unless gateway opened (16020009) need manager privileges (1602000A) unexpected non-digit found (1602000B) unknown request argument (1602000C) excess request arguments (1602000D) incomplete request argument (1602000E) duplicate request argument (1602000F) invalid request unless gateway powered on (16020010) invalid request unless gateway enabled (16020011) request not allowed in script (16020012) bad name server record (16020013) name server pathname unknown (16020014) gateway channel already opened (16020015) submit pathnames too long (16020016) submitted null transparent file pathname (16020017) no internal heap space (16020018) priority number required (16020019) reader number required (1602001A) gateway queue full (1602001B) reader unknown (1602001C) too many files submitted (1602001D) job number required (1602001E) host job number required (1602001F) request requires a host window (16020020) host job number is too long (16020021) no job queued with that job number (16020022) job already assigned to a reader (16020023) error deleting job from queue (16020024) no privileges to cancel job (16020025) pathname required SNA / qm3770: (16030001) error getting config arg (16030002) error opening config file (16030003) error getting config record (16030004) UIM mbx pathname required in config (16030005) error parsing config record (16030006) error creating server mailbox (16030007) error closing config file (16030008) error getting UIM eventcount (16030009) error getting timer eventcount (1603000A) duplicate mbx param (1603000B) duplicate error log param (1603000C) error opening error log file (1603000D) mbx pathname arg required (1603000E) error reading from mbx SNA / api_3270: (16040001) no result (16040002) invalid length (16040003) sna_$open() was already called (16040004) Cannot open configuration file (16040005) Cannot close configuration file (16040006) Cannot find LU number and mbx pathname (16040007) Configuration data not found (16040008) No reads or writes allowed until sna_$open succeeds (16040009) Key entered is not defined or allowed (1604000A) bad buffer length (1604000C) server process does not exist (1604000D) no more channels available (1604000E) channel unexpectedly closed (1604000F) message too big (16040010) invalid mbx name (16040011) cannot connect to the controller emulation (16040012) invalid message from server process (16040040) Translation table not initialized (16040041) Translation type was not ascii_to_ebcdic or ebcdic_to_ascii (16040042) Not at end of keyboard sequence (ASC_TO_EB) (16040043) Not a CECP message (16040044) Invalid CECP type (16040045) Invalid PU Id according to CE (16040046) Invalid LU Id according to CE (16040047) PU is in down state, i.e., no PuCb (1604004B) PU is already open (1604004C) LU already opened (1604004D) Invalid CeCpKindOfData (1604004E) PU is already configured/created (1604004F) LU is already configured/created (16040050) Bad command in cecpdata cmd byte (16040051) Insufficient CE resources (16040052) PU is not open (16040053) LU is not open (16040054) no data/status available (16040055) LU is currently in DISCONnect mode (1604005F) CECP protocol violation access / typemanager: (17010001) internal fatal error - pending data requests (17010002) data cache corruption detected (17010003) invalid type (17010004) gateway file format bad (17010005) change attributes - could not close file (17010006) change attributes failed (17010007) could not reopen file after attribute change (17010008) seek key cache corruption detected (17010009) fatal error (DOMAIN) access / vms server: (17020001) process on host died (17020002) no such program (17020003) no such version (17020004) fatal error (VMS) (17020005) bad procedure value (17020006) invalid arguement (17020007) bad state detected (VMS) (17020008) protocol error (VMS) (17020009) insufficient memory (VMS) (1702000A) file specification syntax error (VMS) (1702000B) Bad or inappropriate device for operation (VMS) (1702000C) Error in directory name (VMS) (1702000D) Logical name error (VMS) (1702000E) Error in quoted string (VMS) (1702000F) Error in file type (VMS) access / apollo presentation: (17030001) host destination refused (17030002) host not responding (17030003) msg send timeout (17030004) msg receive timeout (17030005) connection closed by host (17030006) connection acknowledge timeout (17030007) connect timeout (17030008) message too long (17030009) unknown message type (1703000A) unexpected extra data (1703000B) unexpected msg type on connection acknowledge (1703000C) string too long access / vms presentation: (17040001) login failed (VMS) access / protocol: (17050001) loopback failure (17050002) protocol error (DOMAIN) (17050003) bad state detected (DOMAIN) DSEE / dseelib: (18010001) name not found (18010002) no rights or insufficient rights (18010003) operation failed (18010004) unable to parse command string (18010005) invalid argument (18010006) network problem (18010007) internal error detected (18010008) unable to enter DSEE recursively (18010009) dseelib session not initialized (1801000A) object already exists (1801000B) bad pathname (1801000C) pathname too long for DSEE (1801000D) pathname component too long for DSEE DSEE / History Manager: (18020001) database is in use by someone else (18020002) database recovery is required (18020003) database must be reformatted (18020004) database contains no schema (18020005) no D3M server or MBX_HELPER at database node (18020006) too many clients of D3M server at database node (18020007) no D3M subsystem seal on database schema or area (18020008) D3M subsystem installed on node is broken (18020009) database schema format is obsolete or too new (1802000A) incompatible D3M server at database node (1802000B) database user must be recovered (1802000C) database contains no areas (1802000D) invalid database handle (1802000E) invalid element name (1802000F) element already exists (18020010) unable to access source file (18020011) library recovery is required (18020012) element not found (18020013) branch already exists (18020014) version not found (18020015) unable to create target file (18020016) line of descent not found (18020017) line of descent is reserved (18020018) line of descent merged or obsolete (18020019) line of descent not reserved (1802001A) line of descent not obsolete (1802001B) delete version range on two lines of descent (1802001C) unable to delete only version on line of descent (1802001D) no versions qualified for deletion (1802001E) versions defining range to be deleted must exist (1802001F) unable to delete main line of descent (18020020) unable to validate library (18020021) invalid or nonexistant element id (18020022) invalid or nonexistant branch id (18020023) no library is currently set (18020024) library is not open for reading DSEE / Streams Manager: (18030001) DSEE version map corrupted (18030002) more than one branch has the specified name (18030003) DSEE library recovery is required (18030004) attempt to open an undeclared element DSEE / Configuration Manager: (18040001) invalid model handle (18040002) component set sizes are not the same (18040003) invalid component set size specified (18040004) invalid component identifier specified (18040005) the component is not a buildable component (18040006) the release area pathname already exists (18040007) invalid component specifier (18040008) no component as specified (18040009) specified component is not unique (1804000A) unable to locate the build (1804000B) some components were not exported (1804000C) error encountered in archiving sources used in build (1804000D) error encountered in archiving the system model used in build (1804000E) no model is currently set (1804000F) no system is currently set (18040010) unable to validate the system model (18040011) unable to validate the thread (18040012) unable to set the thread as current (18040013) specified pathname is not a system area (18040014) working context was not created under system (18040015) no thread is currently set (18040016) no derived objects associated with this build (18040017) thread does not specify a version (18040018) unable to construct the translate rule (18040019) unable to determine the version to use (1804001A) unable to insert BCT or derived objects into pool (1804001B) file was modified during the build (1804001C) unable to set builder node (1804001D) invalid pool identifier specified (1804001E) invalid library identifier specified Hyperchannel / driver: (19010001) no controller (19010002) controller not responding to function request (19010003) i/o error (19010004) controller interrupted with no status available (19010005) bad key passed in call (19010006) bad size passed in call (19010007) send failed due to incoming message (19010008) associated data too large (19010009) send or receive invalid in this context (1901000A) no messages available for input (1901000B) input parity error (1901000C) transmit failed (1901000D) receiver busy (1901000E) transmitter busy (1901000F) no associated data supplied by sender (19010010) reply failed (19010011) adapter message buffer full (19010012) watchdog timer expired; port reset (19010013) input message(s) lost due to host delay Debug / %Main: (1A010001) operation not supported (1A010002) user error (1A010003) internal error Debug / Main Debugger: (1A020001) internal error (1A020002) unable to communicate with user interface Debug / mapping utilities: (1A030001) file is not an apollo coff object module (1A030002) invalid object module version (1A030003) invalid handle (1A030004) invalid component type (1A030005) invalid section number (1A030006) address is not in a mapped section Debug / symbol table access: (1A050001) obsolete symbol table version (1A050002) can't allocate storage (1A050003) .blocks section not found (1A050004) invalid code segment number Debug / User Interface: (1A060001) internal error (1A060002) unable to communicate with main debugger (1A060003) bad command syntax Debug / Quit Manager: (1A070001) User Interrupt Detected Debug / cross process stack info: (1A080001) task not found (1A080002) operation illegal for current process (1A080003) operation illegal for specified register (1A080004) specified register value is unavailable (1A080005) can't allocate storage Debug / cross process task info: (1A090001) tasking not enabled (1A090002) task not found Debug / cross process traceback: (1A0A0001) end of stack (1A0A0002) invalid handle (1A0A0003) invalid frame number (1A0A0004) can't allocate storage (1A0A0005) requested information not available (1A0A0006) no process context set (1A0A0007) no frame context set (1A0A0008) unknown object module version (1A0A0009) obsolete symbol table version (1A0A000A) operation invalid cross-process (1A0A000B) no fault information available Integrated SNA / Verb Usage: (1B010001) Program not attached (1B010002) Duplicate attach attempted (1B010003) Invalid conversation ID (rsrc unknown) (1B010004) Context not set (1B010006) Unknown verb type (1B010009) Null structure pointer parameter passed (1B01000A) attach: Gateway Nodespec is a required parameter (1B01000B) attach: LU name is a required parameter (1B01000C) attach: Invalid attach type parameter (1B01000D) attach: LU unknown (1B01000E) attach: LU not available, limits reached (1B01000F) attach: TP name is not configured (1B010010) attach, rattach: Gateway Nodespec not unauthorized or invalid (1B010011) rattach: Conversation id required (1B010012) rattach: Invalid conversation id for rattach (1B010013) attach, rattach: Invalid wait time parameter (1B010014) attach: Not enough space (1B010015) attach: SNA server TP limit reached (1B010016) attach: Not enough space in TP (1B010017) attach: Gateway Nodespec name is too long (1B01001E) alcnv: Partner LU (rlu) is a required parameter (1B01001F) alcnv: Mode name is a required parameter (1B010020) alcnv: Program name (tpn) is a required parameter (1B010021) alcnv: Partner LU (rlu) not found (1B010022) alcnv: Mode not found (1B010023) alcnv: Invalid parameter (type) (1B010024) alcnv: Mapped verb interface not allowed (1B010025) alcnv: Basic verb interface not allowed (1B010026) alcnv: Invalid parameter (when) (1B010027) alcnv: Delayed allocation not allowed (1B010028) alcnv: Immediate allocation not allowed (1B010029) alcnv: Invalid parameter (sync) (1B01002A) alcnv: Requested sync level not allowed (1B01002B) alcnv: PIP not allowed (1B01002C) alcnv: Invalid PIP length (1B01002D) alcnv: Invalid parameter (sec) (1B01002E) alcnv: Requested security not allowed (1B01002F) alcnv: Invalid format for user parameter (1B010030) alcnv: Invalid format for pass parameter (1B010031) malcnv: SNASVCMG cannot be specified for mapped conversations (1B01003C) cnfrm,cnfrmd: Conflict with conversation sync-level (1B010046) dalcnv: Invalid parameter (type) (1B010050) prprcv: Invalid parameter (type) (1B010051) prprcv: Invalid parameter (lock) (1B01005A) rcvwt,pstrct: Invalid parameter (fill) (1B01005B) Invalid parameter (length) cannot be negative (1B010064) snddta: Invalid LL (1B010065) snddta: Invalid LL within the data stream (1B01006E) snderr: Invalid parameter (type) (1B01006F) snderr: SE_ALC is reserved for TPI (1B010070) snderr,dalcnv: Error log data not allowed (1B010078) waitcv: Negative count value is invalid (1B010079) waitcv: Invalid conversation id on list (1B01007A) waitcv: Listed conversation id does not have posting active (1B01007B) waitcv: No conversation with posting is active (1B01007C) waitcv: List size (count) must be positive (1B01007D) waitcv: List size (count) too large (1B010082) testcv: Invalid parameter (type) (1B010083) testcv: Posting not active for conversation (1B01008C) setctx: Path required if tcbid is supplied (1B01008D) setctx: Requested context not found (1B010096) enbssig: data is present (1B010097) enbssig: resources ready (1B010098) enbssig: signal value required Integrated SNA / Conversation State: (1B020001) Conversation State error (1B020002) Logical Record state error (1B020003) conversation for waitcv not in receive state Integrated SNA / Allocate Conversation: (1B030001) Remote TP not available - no retry (1B030002) Remote TP not available - retry (1B030003) Remote LU does not support conversation type (1B030004) PIP data not supported by remote (1B030005) PIP specification error (1B030006) Invalid access Security Information (1B030007) Remote Program does not support requested sync level (1B030008) Remote TP not recognized by remote LU (1B030009) Allocation Failure - no retry (1B03000A) Allocation Failure - Retry (1B03000B) First Speaker session not available (1B03000C) Local resource allocation failure (1B03000D) Cannot authorize security access (1B030016) Allocation rejected by Resource Manager (1B030063) Unknown sense code data received Integrated SNA / Partner Program: (1B040001) Program Error: Current logical record not truncated (1B040002) Program Error: Current logical record truncated (1B040003) Program Error: Data may have been purged (1B04000B) Service Error: Current logical record not truncated (1B04000C) Service Error: Current logical record truncated (1B04000D) Service Error: Data may have been purged (1B040014) Service Error: FMH data mapping not supported (1B040015) Service Error: Data mapping not supported (1B040016) Service Error: Map name not found (1B040017) Service Error: Map execution failure (1B040018) Service Error: Duplicate map name error Integrated SNA / Conversation Deallocated: (1B050000) Normal deallocation by partner (1B050001) Abnormal deallocation by partner (1B050002) Abnormal deallocation by service program (1B050003) Abnormal deallocation verb timeout (1B050004) Abnormal deallocation, Session Failure (1B050005) Abnormal deallocation by partner Integrated SNA / Control Operator Verb: (1B06003F) Limits are not zero (1B060040) Requested limits exceed configuration (1B060041) Sum of minimums exceed maximum session (1B060042) Invalid SNASVCMG limits (1B060043) SNASVCMG mode not initialized (1B060044) Mode limits are closed (1B060045) chgsl not valid for this mode (1B060046) SNASVCMG mode not reset, other modes still not reset (1B060047) CNOS race with remote - remote won (1B060048) Partner does not recognize mode (1B060049) CNOS is in process locally (1B06004A) CNOS allocation error (1B06004B) CNOS resource failure (1B06004C) Insufficient space for a new session (1B06004D) Partner LU is not active (1B06004E) Modes incompatible: session not started (1B06004F) Session not started, link not active (1B060050) Session activation failure (1B060051) CNOS protocol error by partner (1B060052) Cannot change DRAIN=NO to DRAIN=YES (1B060063) Unknown failure (1B060064) Mode limits are zero Integrated SNA / Node Operator Verb: (1B070001) node operator verb failure (1B070002) node operator verb not recognized (1B070003) attach of type AT_NODE (1B07000A) link name not recognized (1B07000B) adjacent link station not recognized (1B07000C) physical unit not recognized (1B07000D) earlier request still active (1B07000E) dial in or dial out required (1B07000F) logical unit name not recognized (1B070010) message queue name not recognized (1B070011) message queue not enabled (1B070012) no message in message queue (1B070064) actpu failure (1B07006E) actlu failure (1B070078) dctpu failure (1B070082) dctlu failure (1B07008C) chgmsgq failure (1B070096) dspmsgq failure (1B0700BE) rtvnmsg failure Integrated SNA / Unsuccessful: (1B080001) No information for conversation (1B080002) Conversation not posted (1B080003) Request-to-send not received (1B080064) Link-trace file open failure (1B080065) Link-trace file close failure network computing system / RPC runtime: (1C010001) communications failure (1C010002) operation number out of range (1C010003) unknown interface (1C010004) can't create socket (1C010005) can't bind socket (1C010006) wrong boot time (1C010007) too many interfaces defined (1C010008) not in call (1C010009) you crashed (1C01000A) no port specified in sockaddr or interface specification (1C01000B) protocol error (1C01000C) too many sockets allocated (1C01000D) invalid interface re-register (1C01000E) can't recv (1C01000F) bad packet (1C010010) no location in handle (1C010011) address in use (1C010012) input arguments too big (1C010013) output arguments too big (1C010014) server is too busy to handle call (1C010015) string parameter longer than declared maximum length (1C010016) tried to register too many objects (1C010017) invalid handle (1C010018) client isn't authenticated (1C010019) invalid authentication type (1C01001A) can't allocate heap storage (1C01001B) can't allocate near heap storage network computing system / locating broker: (1C020001) database format out of date (1C020002) database in use in an incompatible manner (1C020003) no matching entry available (1C020004) unable to complete registration operation (1C020005) can't access database (1C020006) can't reach location server (1C020007) bad entry network computing system / DRM: (1C030001) incorrect software or database version (1C030002) resource locked (1C030003) resource not available (1C030004) data file full (1C030005) propagation file full (1C030006) replica unconfigured (1C030007) replica uninitialized (1C030008) replica deleted (1C030009) replica closed (1C03000A) replica reset (1C03000B) program error (1C03000C) replica already exists (1C03000D) replica not found (1C03000E) too many replicas (1C03000F) bad replica address (1C030010) bad remote replica state (1C030011) earlier timestamp (1C030012) clocks skewed (1C030013) no such entry (1C030014) entry not found (1C030015) entry already exists (1C030016) bad entry length (1C030017) bad entry (1C030018) bad record number (1C030019) object already open (1C03001A) too many objects opened (1C03001B) object not open (1C03001C) bad argument (1C03001D) create failed (1C03001E) file io error (1C03001F) too many keys (1C030020) object already exists (1C030021) bad protocol family (1C030030) no default replica specified network computing system / Registry Server: (1C040001) Operation not yet implemented (1C040002) Operation not supported on specified domain (1C040003) Entry already exists (1C040004) Name already exists (1C040005) Unix id changed or incorrect (1C040006) Entry is an alias (1C040007) No more matching entries (1C040008) Entry not found (1C040009) Registry server unavailable (1C04000A) Person is not a member of specified group (1C04000B) Person is not a member of specified org (1C04000C) Person is not a member of specified group and org (1C04000D) Incomplete account name (1C04000E) Password incorrect (1C04000F) User not authorized to perform operation (1C040010) Registry is read only or operation performed at a slave (1C040011) PGO alias entry has invalid owner (1C040012) Invalid data - record too long network computing system / Registry Server Replication: (1C050001) Program error (1C050002) Invalid database version (1C050003) Unable to create database (1C050004) Unable to open database (1C050005) Unable to read database (1C050006) Unable to save database (1C050007) Unable to rename database (1C050008) Master registry site not found (1C050009) Registry site is the master (1C05000A) Registry site is a slave (1C05000B) Update is not from master (1C05000C) Replica is in a bad state (1C05000D) Replica name is unavailable (1C05000E) Replica has bad address (1C05000F) Replica is in the deleted state (1C050010) Database is locked (1C050011) Clocks are skewed (1C050012) Update arrived out of sequence (1C050013) Initialization partner unavailable network computing system / RPROC: (1C060001) Can't run specified program (1C060002) Can't create a new process for program (1C060003) Server internal error (1C060004) Too many arguments specified (1C060005) Server won't create a process (1C060006) Server can't change identity of new process network computing system / Kerberos: (1C070001) Principal expired (1C070002) Service expired (1C070003) Authentication expired (1C070004) Unknown protocol version number (1C070005) Principal: Incorrect master key version (1C070006) Service: Incorrect master key version (1C070007) Bad byte order (1C070008) Principal unknown (1C070009) Principal not unique (1C07000A) Principal has null key (1C070014) Permission Denied (1C070015) Can't read ticket file (1C070016) Can't find ticket (1C07001A) Ticket granting ticket expired (1C07001F) Can't decode authenticator (1C070020) Ticket expired (1C070021) Ticket issue date too far in the future (1C070022) Repeat request (1C070023) Ticket for wrong server (1C070024) Request inconsistent (1C070025) Time is out of bounds (1C070026) Incorrect network address (1C070027) Protocol version mismatch (1C070028) Illegal message type (1C070029) Message integrity error (1C07002A) Message duplicate or out of order (1C07002B) Unauthorized request (1C070033) Current password is NULL (1C070034) Current password incorrect (1C070035) Protocol error (1C070036) Error returned by KDC (1C070037) Null ticket returned by KDC (1C070038) Retry count exceeded (1C070039) Can't send request (1C07003D) Warning: Not ALL tickets returned (1C07003E) Password incorrect (1C07003F) Protocol error (1C070046) Generic error (1C070047) Don't have ticket granting ticket (1C07004C) No ticket file (1C07004D) Can't access ticket file (1C07004E) Can't lock ticket file; try later (1C07004F) Bad ticket file format (1C070050) Read ticket file before tf_init (1C070051) Bad Kerberos name format network computing system / Authentication: (1C080001) Intruder alert (1C080002) Non-IP address families not supported, sorry (1C080003) Authentication is of wrong type (1C080004) Encryption key is weak (1C080005) Encryption Key parity error network computing system / Location Broker Cache Manager: (1C090001) Location entry not found (1C090002) Entry handle is no longer valid (1C090003) No more room in cache for entry (1C090004) No servers found (1C090005) Latency period has not expired (1C090006) No socket families found (1C090007) Can't open lbcm cache (1C090008) Can't map lbcm cache (1C090009) Can't allocate memory for cache (1C09000A) Cache ID doesn't match existing cache network computing system / data access manager: (1C0A0001) invalid key count (1C0A0002) invalid record length (1C0A0003) invalid key length (1C0A0004) memory allocation failed (1C0A0005) record not found (1C0A0006) invalid key number (1C0A0007) no more entries (1C0A0008) internal error (1C0A0009) invalid handle (1C0A000A) record already exists (1C0A000B) handle is read-only (1C0A000C) file I/O error network computing system / data store manager: (1C0B0001) could not create database file (1C0B0002) file I/O error (1C0B0003) could not open database file (1C0B0004) incompatible format version (1C0B0005) memory allocation failed (1C0B0006) attempt to write same block twice (1C0B0007) specified header size too large (1C0B0008) no more entries (1C0B0009) invalid handle (1C0B000A) invalid pointer (1C0B000B) info text too long (1C0B000C) file is already in use (1C0B000D) invalid marker network computing system / attribute broker: (1C0C0001) All entries have been returned (1C0C0002) Attempt to set attr. to inconsistent value (1C0C0003) Can't read entry in known attribute table (1C0C0004) Can't add entry to the known attribute table (1C0C0005) Can't read entry in the known object table (1C0C0006) Can't add entry to the known object table (1C0C0007) Can't store attr value record (1C0C0008) Can't retrieve attr value record (1C0C0009) Invalid lookup marker parameter (1C0C000A) Invalid expression tree parameter (1C0C000B) Stale marker (i.e. has expired) (1C0C000C) Can't add entry to the object list table (1C0C000D) Can't create an object list (1C0C000E) Can't delete entry from the object list table (1C0C000F) Can't delete an object list (1C0C0010) Invalid attribute expression (1C0C0011) Can't add entry to an object list (1C0C0012) Can't delete entry from an object list (1C0C0013) Can't read entry in an object list network computing system / attribute broker client agent: (1C0D0001) Bad token in attribute expression (1C0D0002) Malformed attribute expression (1C0D0003) Can't convert attribute name to UUID network license server / server: (1D010001) License not found in database (1D010002) NetLS license not found in database (1D010003) Past expiration date on license (1D010004) Past expiration date on NetLS license (1D010005) Before start date on license (1D010006) Before start date on NetLS license (1D010007) Version not found in database (1D010008) NetLS license version not found in database (1D010009) Not enough licenses (1D01000A) Not enough NetLS licenses (1D01000B) Not authorized to use product (1D01000C) Wait entry deleted (1D01000D) Bad I/O (1D01000E) Other users are waiting (1D01000F) No licenses available (1D010010) No NetLS licenses available (1D010011) Still waiting for a license (1D010012) No active license to be released (1D010013) License is no longer granted to this user (1D010014) Time disparity too large (1D010015) Vendor id not in database (1D010016) Duplicate vendor id (1D010017) Duplicate product record for this vendor (1D010018) No such product for this vendor (1D010019) Could not delete vendor - still has products (1D01001A) Database not valid for this server (1D01001B) No such vendor (1D01001C) Database corrupt (1D01001D) Warning: product name changed (1D01001E) Vendor "Apollo" can not be deleted (1D01001F) Fatal error - check error log (1D010020) Vendor key is incorrect (1D010021) NetLS server not found (1D010022) Wrong version of NetLS Server (1D010023) NetLS log file contains invalid data (1D010024) Start date of license is before compound derived start date (1D010025) Expiration date of license is after compound derived expiration date (1D010026) License type contradicts license type specified in compound password (1D010027) Aggregate duration is less than duration specified (1D010028) License has not expired - cannot delete (1D010029) License annotation field is incorrect (1D01002A) This product already exists under a different name network license server / library: (1D020001) nlslib not initialized (1D020002) Not waiting in any queue (1D020003) Not bound to any server (1D020004) Vendor key is incorrect (1D020005) No matching socket families found (1D020006) No servers available for this vendor (1D020007) Vendor id is invalid (1D020008) Bad parameter (1D020009) Job id is invalid (1D02000A) Duplicate vendor id (1D02000B) Cannot create nodelock file (1D02000C) No server handle network license server / tools: (1D030001) Product version incorrect (1D030002) Password contains invalid characters (1D030003) Incorrect target in password (1D030004) Invalid password or vendor incorrect (1D030005) Internal error (1D030006) 1.0 or 1.1 license not bundled (1D030007) Nodelocked license cannot be added to server database network license server / usage metering server: (1D040001) Vendor's usage meter license not found (1D040002) No usage meter license for this product (1D040003) No usage meter license for this version (1D040005) Usage meter record not found (1D040006) Vendor is not owner of this usage meter record (1D040007) Buffer too small (1D040008) All usage meter record(s) to be purged not marked as deleted (1D040009) Some usage meter record(s) to be purged not marked as deleted (1D04000A) Usage meter record marked as deleted (1D04000B) Function not implemented for this operating system (1D04000C) Status record not found network license server / usage metering library: (1D050001) umlib not initialized (1D050002) unused (1D050003) Not bound to any server (1D050004) Vendor is incorrect (1D050005) No matching socket families found (1D050006) No servers available for this vendor (1D050007) Vendor id is invalid (1D050008) Bad parameter (1D050009) Job id is invalid (1D05000A) Duplicate vendor id (1D05000B) Requested server not found (1D05000C) Buffer too small (1D05000D) Usage meter database modified since last read tape manager / manager: (1E01FFFE) Warning: Drive status has changed (1E01FFFF) Warning: Marginal media detected by device (1E010001) Non-recoverable parity error (1E010002) Cannot find phyisical tape record (1E010003) Media error detected (1E010004) Tape drive is offline (1E010005) Tape drive device error (1E010006) Tape drive or controller is not ready (1E010007) Tape record too large for buffer, data lost (1E010008) Tape drive timeout (1E010009) Remote tape network error (1E01000A) Operation not supported by device or controller window systems / Apollo: (1F010001) display unit number out of range (1F010002) display screen number out of range (1F010003) display screen already inited (1F010004) display screen is not a root rectangle (1F010005) time out waiting primary window system server (1F010006) no display associated with rectangle MD / SCSI Device: (20010000) sensed no sense (20010001) sensed recovered error (20010002) sensed not ready (20010003) sensed medium error (20010004) sensed hardware error (20010005) sensed illegal request (20010006) sensed unit attention (20010007) sensed write protected (20010008) sensed blank check (2001000B) sensed command aborted (2001000D) sensed volume overflow MD / SCSI Manager: (20020001) bus does not exist (20020002) selected device not present (20020003) requested device in use (20020004) bad length (20020005) unsupported function requested (20020006) operation timeout (20020007) internal manager error (20020008) quit during wait (20020009) didn't fill buffer on xfer from device (2002000A) ran out of buffer on xfer from device (2002000B) ran out of data on xfer to device (2002000C) didn't empty buffer on xfer to device (2002000D) parity error (2002000E) illegal command (2002000F) illegal data direction (20020010) scsi target disconnected from bus MD / Disk/Tape Manager: (20030001) unknown error status from device (20030002) illegal request (20030003) unit attention (20030004) wrong SCSI device class (20030005) bad length (20030006) supplied buffer too small (20030007) disk has unusable logical block size (20030008) device not ready DOMF / %Main: (21010001) operation not supported (21010002) user error (21010003) internal error DOMF / Runtime: (21020001) internal error DOMF / NWOM: (21030001) internal error DOMF / NCS OM: (21040001) internal error DOMF / FANTOM: (21050001) internal error DOMF / OM: (21060001) internal error DOMF / MOM: (21070001) internal error DOMF / ORB: (21080001) internal error DOMF / LOR: (21090001) internal error